Grizzly Industrial G0531B - User Manual
Grizzly Industrial G0531B Band Saw – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Test Run; loose enough to slide onto resaw fence.
- Page 3 – Motor Brake; OFF Button; TWIST; Aligning Fence; blade (see G0566 Manual; NOTICE
- Page 5 – BRAKE
- Page 7 – WITH MOTOR BRAKE
- Page 9 – SECTION 2: POWER SUPPLY; Availability
- Page 15 – Main Parts List
- Page 19 – Guides
- Page 20 – Guides Parts List
- Page 23 – year to the original purchaser from
COPYRIGHT © JUNE, 2008 BY GRIZZLY INDUSTRIAL, INC., REVISED APRIL, 2019 (MN)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL10789 PRINTED IN TAIWAN
The Model G0531B/G0566B is the same as the Model G0566, except it has a magnetic brake motor, resaw
fence, and square fence rail. Besides the instructions, data sheet, circuit requirements, parts, and wiring
diagram in this insert, the content in the Model G0566 owner's manual is the same for both machines.
Before operating your new machine, you MUST read and understand this insert and the entire Model G0566
manual to reduce the risk of injury from improper use or setup.
If you have any further questions about this manual insert or the differences between the Model
G0531B/G0566B and the Model G0566, contact our Technical Support at
(570) 546-9663 or email
Machine Inventory
MODEL G0531B/G0566B
21" BANDSAW
MANUAL INSERT
For Machines Mfd. Since 09/18
and Owner's Manual Revised 10/04
Figure 1. G0531B/G0566B inventory.
B
C
E
D
F
G
H
I
J
K
Box Contents (Figure 1)
Qty
A. Bandsaw (not shown) ................................. 1
B. Miter Gauge ................................................ 1
C. Fence.......................................................... 1
D. Resaw Fence ............................................. 1
E. Guide Post Handwheel............................... 1
F. Hex Wrenches 5, 6mm ..........................1 Ea
G. Open-End Wrenches 10/13, 17/19mm ..1 Ea
H. Lifting Rings ................................................ 2
I. Resaw Fence Lock Handle (Fence) ........... 1
J. Sliding Plate M8-1.25 (Fence) .................... 1
K. Flat Washer 8mm (Fence) ......................... 1
Tools Needed
Qty
Hex Wrenches 5, 6mm ................................. 1 Ea
Open-End Wrenches 10/13, 17/19mm ......... 1 Ea
To assemble machine:
1. Remove cap screw, knobs, and washers that
hold fence rail to table, then remove rail.
2. Flip rail over and re-install with fasteners
removed in
Step 1.
3. Install fence handle on fence.
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
V2.04.19
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Grizzly Industrial G0531B
Summary
Model G0531B/G0566B (Mfd. Since 09/18) -2- Test Run 1. Follow Steps 1-3 in the G0566 Manual on Page 24. 2. Verify that the machine is operating cor- rectly by turning the switch disabling key (see Figure 4) to "1" and turning the machine ON. —When operating correctly, the machine runs smooth...
Model G0531B/G0566B (Mfd. Since 09/18) -3- 6. Turn the switch disabling key to "0", as shown in Figure 4. 7. Try to turn the machine ON. —If the bandsaw does not start, the switch disabling feature is working as designed. The Test Run is complete. —If the bandsaw starts, immediately discon- ...
Model G0531B/G0566B (Mfd. Since 09/18) -5- The information contained herein is deemed accurate as of 4/28/2019 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3 Model G05...
