Graco LTS 15 - User Manual
Graco LTS 15 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Inlet Valve Replacement Kit; Disassembly
- Page 4 – gs
- Page 5 – bt
- Page 6 – Graco Headquarters: Minneapolis
312340C
Instructions
Inlet/Outlet Valve Repair Kit for
Project Painter
™
5, Project Painter
™
7,
X5, X7, LTS 15, and LTS 17 Airless Sprayers
This manual contains kit installation instructions only
Outlet Valve Repair Kit: 289120, 289878, 16E845
Inlet Valve Repair Kit: 288701, 289116, 16E844
Pressure Relief Procedure
Important Safety Instructions
For detailed sprayer information and warnings, see Operation
manual 312079, 312082 included with Magnum sprayers.
To help prevent injection injuries, follow this
procedure when you stop spraying and
before you service or clean the sprayer,
remove parts, or repair leaks.
Project Painter 5 and Project Painter 7:
1.
Turn AllControl to OFF. Unplug sprayer.
2.
Trigger gun.
3.
Put trigger safety in ON position.
NOTE: Leave AllControl in OFF position until you are ready to spray again.
X5, X7, LTS 15, and LTS 17:
1.
Turn power switch to OFF and unplug prayer.
2.
Turn Spray/Prime valve to PRIME to relieve pressure.
3.
Trigger gun.
4.
Place trigger safety in ON position.
NOTE: Leave Spray/Prime valve in PRIME position until you are ready to
spray again.
If you suspect that the spray tip or hose is completely clogged or that pressure has
not been fully relieved after following the steps above, VERY SLOWLY loosen the tip
guard retaining nut or hose end coupling to relieve pressure gradually. Then loosen
it completely. Clear the tip or hose obstruction.
ti9168a
ti11868a
ENG
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco LTS 15
Summary
312340C 3 Inlet Valve Replacement Kit Disassembly 1. Unplug power cord. 2. Relieve Pressure by following the procedure described on page 1, or see the Operation manual 312079. 3. Remove all hoses (A). 4. Clean all dried residue from around pump inlet valve. 5. Remove inlet valve fitting (B), ball (C...
4 312340C Outlet Valve Replacement Kit 289878, 16E845 X5, X7, LTS 15, and LTS 17 Disassembly 1. Unplug power cord. 2. Relieve Pressure by following the procedure described on page 1, or see the Operation manual 312001 or 313034. 3. Remove paint hose (pn). 4. Clean all dried residue from around pump ...
312340C 5 Inlet Valve Replacement Kit 288701, 16E844 X5, X7, LTS 15, and LTS 17 Disassembly 1. Unplug power cord. 2. Relieve Pressure by following the procedure described on page 1, or see the Operation manual 312001 or 313034. 3. Remove drain tube (U) and suction tube (W). 4. Clean all dried residu...
