GE ZGG300NBPSS - Manual

GE ZGG300NBPSS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

170133

Specification Created 10/08

ZGG300NBPSS - Natural Gas Built-in Outdoor Grill

ZGG300LBPSS - LP Gas Built-in Outdoor Grill

Dimensions and Installation Information (in inches)

Outdoor Built-in Cooktop

These grills are designed to be installed into a non-
combustible enclousure.
• The grill drops into the opening and hangs from

the side flanges. It does not require support from
the bottom.

• The cutout must be completely covered with

non-combustible material such as stone, brick,
ceramic tile, concrete board, etc. The countertop
surface and edges must be flat and level.

• If the countertop has an overhang, it must be

notched or cut back flush with the front face of
the cabinet below.

• Allow at least 12" minimum clearance at the

back of the grill when the exhaust is directed to a
window or surface that is difficult to clean. Allow
at least 4" clearance behind the grill to allow the
hood lid to open. See notched detail below.

• Allow 12" minimum clearance on both sides

and the back of the grill to adjacent vertical
combustible construction.

• These gas grills cannot be used below any type of

overhead construction.

• These grills are designed for outdoor use only. Do

not locate the cooktop in a building, garage or
other enclosed or semi-enclosed area.

• Locate the backside of the grill away from

prevailing winds and avoid cooking in windy
conditions.

29-7/8"

12" Min. to Combustibles

4" Min. Clearance for Lid

to Non-Combustibles

27"

26"

*The weight of the grill is fully supported by

the side trims. The back of the grill overlaps

the back edge of the cutout .

10-1/4" from

Bottom of

Support Flange

*25-1/2"

Countertop Depth

27" to Front

of Control Panel

28-1/2" to Front of Bullnose

28-3/4"

36"

Min.

1-1/8" Min.

10-7/8"

24-1/2"

Grill Cutout

Gas and

Electrical

Locations

Opening

for Optional

Access Doors

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.