Focal FDP SPORT V2 - User Manual
Focal FDP SPORT V2 Car Amplifier – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CHANNEL STEREO MODE
- Page 3 – Figure 2B | 4 Channel Stereo Mode Wiring Diagram
- Page 4 – CHANNEL BRIDGED STEREO MODE; INPUTS; SLOPE; GAIN CONTROL; SPEAKER OUTPUTS
- Page 5 – Figure 3B | 2 Channel Bridged Stereo Mode Wiring Diagram
- Page 6 – CHANNEL STEREO & BRIDGED MONO MODE
- Page 7 – Figure 4B | 3 Channel Stereo & Bridged Mode Wiring Diagram
- Page 8 – TROUBLESHOOTING; > FOCAL SIGN DOES NOT LIGHT
- Page 9 – > FOCAL SIGN IS FLASHING
- Page 10 – WARRANTY INFORMATION; them to be free of manufacturing defects for a period of
- Page 11 – TECHNICAL SPECIFICATIONS
1
Shared Controls
(All Channels)
Ch 1+2 Controls
Refer to Figures 2B, 3B, or 4B for wiring diagrams
Refer to Figures 2A, 3A, or 4A for control diagrams
Ch 3+4 Controls
Figure 1 | N
CONFIGURATIONS
These are the 3 basic configurations that you will be using when installing your
Focal FDP
SPORT
V2
. Pick the mode you will be running, turn to the appropriate page, and follow the
instructions to make the correct amp adjustments.
•
4 Channel Stereo Mode (Page 2)
•
2 Channel Bridged Stereo Mode (Page 4)
•
3 Channel Stereo and Bridged Mono Mode (Page 6)
FDP SPORT
V2:
4-CH MOTO & ALL-TERRAIN AMP
OPERATION / CONFIGURATION MANUAL
FDP SPORT
V2
avigating the FDP Sport V2 Controls
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 4 CHANNEL STEREO MODE INPUTS • Under the “INPUTS”, move the switch to either position of “2IN or 4IN” depending on how many inputs you are using to run the amp, 2 or 4. • If you are only using one single pair of RCA’s from your source, then plug them into the Channel 3+4 or (REAR) RCA inputs, and ...
3 Select “ NORM ” Front Channel 1+2 Adjustments Select the amount of inputs you are using Rear Channel 3+4 Adjustments FRONT SPEAKERS + – + – REAR SPEAKERS + – + – BATTERY 50 AMP FUSE GROUND AMP TURN ON FDP SPORT LEFT Ch. 1 RIGHT Ch. 2 LEFT Ch. 3 RIGHT Ch. 4 Figure 2B | 4 Channel Stereo Mode Wiring ...
4 2 CHANNEL BRIDGED STEREO MODE INPUTS • You only need to use Rear INPUT Channels 3+4. NORMAL/BRIDGED • Set switch to “BRIDGED” SLOPE • Using the “SLOPE” switch on the top, select 12db for your crossover slope. CHANNELS 3 & 4 CROSSOVER CONFIGURATION • To adjust the crossovers, you will be lookin...
