Epson WorkForce 635- User Manual
Epson WorkForce 635– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Start Here
5
Load paper
You can load letter-, A4-, or legal-size paper, as well as
4 6-, 5 7-, or 8 10-inch photo paper. For instructions on
loading legal-size paper, see the online
User’s Guide
.
1
Pull out the paper cassette.
2
Slide the edge guides outward.
3
Position the guide shown below for the size of paper
you’re using.
4 6-inch
LTR
Letter-size
4
Insert the paper with the glossy or printable side face-
down.
4 6-inch
Letter-size
5
Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
Letter-size
4 6-inch
6
Gently insert the paper cassette.
7
Extend the output tray as shown.
Read these instructions before using your product. These
instructions are for the WorkForce 630/632/633/635.
1
Unpack
French control
panel stickers
(included for
Canada only)
Power cord
Phone cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
Caution:
Do not remove the plastic strip shown below. It is part of the
Automatic Document Feeder.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Raise the control panel and press the
On
button.
To lower the control panel, press the release bar
underneath.
3
Select settings
1
To select
English
as your language, press
OK
.
(If you want to change the language, press or to
select it, then press
OK
.)
2
Select your
Country/Region
and press
OK
.
3
Select
On
if
Daylight Saving Time
is in effect (spring
through summer), otherwise select
Off
. Press
OK
.
4
Select the
Date
format and press
OK
.
5
Press the number keys to enter the
Date
and press
OK
.
6
Select the
Time
format (
12h
or
24h
) and press
OK
.
7
Press the number keys to enter the
Time
. Then press
or to select
AM
or
PM
, if necessary.
8
Press
OK
.
4
Install ink cartridges
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the holder for each color.
6
Press each cartridge down until it clicks.
7
Close the cartridge cover. Press down until it clicks.
8
Lower the scanner.
9
Press the
OK
button to prime the ink delivery system.
This takes several minutes.
Note:
Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
*411856600*
*411856600*
WorkForce
®
630 Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
