Epson WF-3530- Quick Guide

Start Here

Note:

Make sure the paper is loaded against the edge guide

and not sticking out from the end of the cassette.

4

Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.

5

Gently insert the paper cassette.

Note:

The paper may slide forward slightly as you insert the

cassette. This is normal.

6

Extend the output tray and raise the stopper as shown.

6

Connect the fax line

To fax, connect the phone cord to a telephone wall jack and
to the

LINE

port on your product. To connect a telephone or

answering machine, use the

EXT.

port on your product. See

the

Quick Guide

for more details.

Note:

If you’re connecting to a DSL phone line, you must use a DSL

filter or you won’t be able to fax. Contact your DSL provider for the
necessary filter.

Read these instructions before using your product.

Note for Spanish speakers/Nota para hispanohablantes:

Para

obtener instrucciones de configuración en español, consulte la

Guía

de instalación

en

www.epson.com/support/wf3530sp

(requiere una

conexión a Internet).

1

Unpack

Copy/

Fax/

Scan/

French control

panel stickers

(included for

Canada only)

Caution:

Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials.

2

Turn on

1

Connect the power cord to the back of the printer and to an
electrical outlet.

Caution:

Do not connect to your computer yet.

2

Press the

power button.

3

Select settings

1

To select English as your language, press

OK

. If you want

to change the language, press or to select it, then
press

OK

.

2

Select your country/region and press

OK

.

3

Select

Summer

if Daylight Saving Time is in effect;

otherwise, select

Winter

. Press

OK

.

4

Select the date format and press

OK

.

5

Press the number keys to enter the date and press

OK

.

6

Select

12h

(AM/PM) or

24h

and press

OK

.

7

Press the number keys to enter the time. Then select

AM

or

PM

.

8

Press

OK

.

Note:

You can change the time and date settings using the product’s

control panel. For more information, see the online

User’s Guide

.

4

Install ink cartridges

1

Lift the scanner unit.

2

Open the cartridge cover.

3

Shake the ink cartridges gently 4 or 5 times, then
unpack them.

4

Remove only the yellow tape from each cartridge.

Caution:

Don’t remove any other seals or the cartridges may

leak.

5

Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.

6

Close the cartridge cover. Press down until it clicks into
place. Then lower the scanner unit.

7

Ink priming begins. This takes about 6 minutes.

Note:

Your printer ships with full cartridges and part of the ink

from the first cartridges is used for priming the printer.

Caution:

Don’t turn off the printer while it is priming or you’ll

waste ink.

5

Load paper

You can load letter-, A4-, or legal-size paper, as well as
envelopes, and various sizes of photo paper in cassette �. In

various sizes of photo paper in cassette �. In

photo paper in cassette �. In

cassette 2, you can load only letter-, A4-, or legal-size plain
paper. For instructions on loading envelopes, photo paper,
or legal-size paper, or using the rear feed slot, see the online

User’s Guide

.

1

Pull out a paper cassette.

2

Squeeze and slide out the edge guides.

3

Insert the paper with the glossy or printable side
facedown.

*412469800*

*412469800*

WF-3530