Epson Stylus NX420 - User Manual
Epson Stylus NX420 Multifunction Printer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Start Here
3
Squeeze the edge guide as you slide it all the way to the
left.
4
Load letter or A4-size paper against the right edge and
behind the tab, with the printable side face up.
5
Slide the edge guide over.
Continue with section 6 to choose your connection type.
Read these instructions before using your product.
1
Unpack
French control
panel stickers
(included for
Canada only)
Power cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
3
Select language
1
To select
English
as your language, press
Start
.
Note:
If you want to change the language, press
or
to
select it, then press
Start
.
4
Install ink cartridges
Note:
Do not load paper yet.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
4
Insert the cartridges in the holder for each color.
5
Press each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
7
Lower the scanner.
8
Press the
Start
button to charge the ink.
Priming takes about 2 minutes.
Note:
Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
5
Load paper
1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise
the stopper.
*411841500*
*411841500*
Epson Stylus
®
NX420 Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
