Epson MW-120- User Manual
Epson MW-120– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical specifications; Oscilloscope mode
- Page 4 – Accessories
- Page 5 – Vertical deflection; Horizontal; Number of digitizers:; Display and acquisition; Technical specifications 120 Series
- Page 6 – Dual input meter
- Page 7 – FlukeView; Maximum input voltage:
- Page 8 – Cable kits
- Page 9 – International safety standards; Ordering information
- Page 10 – Selection guide; Keeping your world
ScopeMeter
®
120 and 190 Series
incl. 225C and 215C
Technical Data
ScopeMeter 215C,
225C and 190C Series:
Speed, performance
and analysis power
For demanding applications, the
ScopeMeter 215C, 225C and 190C
Series high-performance oscillo-
scopes offer specifications usually
found on top-end bench instru-
ments. With up to 200 MHz band-
width, 2.5 GS/s real time sampling
and a deep memory of 27,500
points per input, they’re ideal
for engineers who need the full
capabilities of a high-performance
scope in a handheld, battery pow-
ered instrument.
•
Dual input - 200, 100 or
60 MHz bandwidth
•
Up to 2.5 GS/s real time
sampling per input
•
Bus Health Test capability for
industrial buses (225C and 215C)
•
High waveform resolution of
3000 datapoints per channel
•
Frequency Spectrum using FFT
analysis
•
Connect-and-View
™
automatic
triggering, a full range of manual
trigger modes plus external trig-
gering
•
Digital Persistence for analyzing
complex, dynamic signals like on
an analog oscilloscope
•
Fast display update rate for
seeing dynamic behavior
instantaneously
•
Automatic capture and replay of
100 screens
•
27,500 points and more per
input record length using
ScopeRecord
™
mode
•
1,000 V CAT II and 600 V
CAT III safety certified
•
Up to 1,000 V independently
floating isolated inputs
•
5000 count DMM and paperless
recorder built-in
•
Four hours rechargeable
NiMH battery pack
ScopeMeter 120 Series:
Three-in-one simplicity
The compact ScopeMeter 120 Series
is the rugged solution for industrial
troubleshooting and installation
applications. It’s a truly integrated
test tool, with oscilloscope, multi-
meter and “paperless” recorder in
one affordable, easy-to-use instru-
ment. Find fast answers to problems
in machinery, instrumentation,
control and power systems.
•
A dual input 40 MHz or 20 MHz
digital oscilloscope
•
Two 5,000 counts true-rms
digital multimeters
•
Cursor measurements
(Fluke 124, 125)
•
A dual input TrendPlot recorder
•
Connect-and-View trigger
simplicity for hands-off operation
•
Shielded test leads for oscillo-
scope, resistance, continuity
and capacitance measurements
•
Full bandwidth, VPS40 10:1
40 MHz probe included standard
with Fluke 124, 125
•
Up to seven hours battery
operation
•
600 V CAT III safety certified
•
Optically isolated RS-232
interface
•
Rugged, compact case
•
Bus Health test for industrial bus
systems (Fluke 125)
•
Power measurements and har-
monics measurement (Fluke 125)
CE
RTIF
IED TO MEET IS
O 9
00
1
♦�
QU
AL
ITY
MANA
GEMENT S
YST
EM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Epson MW-120
Summary
2 Fluke Corporation ScopeMeter 215C, 225C and 190C Series, 120 Series Fluke 225C Fluke 215C Fluke 192C Fluke 199C Fluke 196C Bandwidth 200 MHz 100 MHz 60 MHz Rise time 1.7 ns 3.5 ns 5.8 ns Bandwidth limiter: User selectable: 10 kHz, 20 MHz or off Number of inputs: Two plus external trigger. All inpu...
Memory save and recall Scope memories: 15 memory locations that each can contain two waveforms plus corresponding setup. With each storage action, a user specified name (20 ASCII characters long) can be assigned to the stored data, for easier reference. Recorder memories: 2 memory locations that eac...
Cursor measurements (125, 124) Sources: Input A, Input B Modes: Single or dual vertical cursor, dual horizontal cursor, risetime or falltime Measurements: Single vertical line: Average, min value, max value, time from start of recording in roll mode Dual vertical lines: ∆ V at markers, time between ...
