Page 2 - Chapter 1
Contents Chapter 1 Getting to Know Your Printer Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Chapter 2 Safety Instructions Safety Instructions. . . . . . . . . . . . . . . . . ....
Page 7 - Features; Your EPSON
Chapter 1 Getting to Know Your Printer Features Your EPSON ® GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 is an ink jet printer with a tractor feeder. Your printer provides high-quality printing and superior performance in acompact design. The printer has the following features: ❏ The ability to ...
Page 8 - Chapter 2; Safety Instructions; Warnings; Important safety instructions; When setting up the printer
Chapter 2 Safety Instructions Safety Instructions Warnings, Cautions, and Notes ! Warnings must be followed carefully to avoid bodily injury. ! Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of your printer. Important...
Page 10 - When maintaining the printer; Do not spill liquid onto the printer.; When handling paper; Do not load paper that is curled or has been folded.; When operating the printer; Observe the following when handling ink cartridges:
❏ If you plan to use a printer stand, follow these guidelines:- Use a stand that can support at least twice the weight of the printer.- Never use a stand that tilts the printer. The printer should always be kept level.- Position your printer’s power cord and interface cable so they do not interfere ...
Page 12 - Restriction of use; For Turkish users; AEEE Yönetmeliğine Uygundur.; For Ukrainian users
Restriction of use When this product is used for applications requiring high reliability/safety, such as transportationdevices related to aviation, rail, marine, automotive, etc.; disaster prevention devices; various safetydevices, etc.; or functional/precision devices, etc., you should use this pro...
Page 13 - For Argentina users; When handling AC adapter
For Argentina users When handling AC adapter ! Precaución: Confirme que el cable de alimentación de CA cumpla con las normas de seguridad localespertinentes. ❏ Coloque la impresora y la fuente externa de poder cerca a una toma eléctrica de pared de la quepueda desenchufar la fuete externa de poder f...
Page 14 - For Users in Russia, Belarus, and Kazakhstan; Customer information; SEIKO EPSON CORPORATION; Official representative in CIS countries:
❏ Desenchufe la impresora y la fuente externa de poder antes de limpiar la impresora. Límpiela sólocon un paño húmedo. No utilice productos de limpieza líquidos o en aerosol. No aplique líquidode ningún tipo directamente al cristal de la impresora. ❏ Desenchufe la impresora y la fuente externa de po...
Page 15 - Labeled on the product
Production month and year: Labeled on the product with 6 numbers following MD. (MD: YYYYMM) Country of production: Labeled on the product GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide Safety Instructions 15
Page 16 - Chapter 3; Acceptable Paper Conditions; Your printer can handle continuous paper with the push tractor.
Chapter 3 Paper Handling Acceptable Paper Conditions ! Caution: ❏ Do not use paper that is folded, creased, curled, torn, stained, or stamped. A: TornB: CurledC: CreasedD: Folded ❏ Use only paper that meets the paper specifications. For more information, see “Paper” onpage 92. Printing on Continuous...
Page 17 - Printing with the push tractor; Do not touch the paper sensor on the left sprocket unit.
Position the printer and continuous paper as shown in the illustrations below so that the paper isloaded smoothly. * 1 m or less Note: ❏ The printing position may be misaligned if the continuous paper touches the printer’s stand or anycables. Position the continuous paper so that it is loaded smooth...
Page 18 - The left sprocket unit is fixed in place and cannot be adjusted.
2. Facing the back of the printer, release the right sprocket unit by pulling the sprocket lock lever up. 3. Slide the right sprocket to match the width of your paper, but do not lock it. Note: The left sprocket unit is fixed in place and cannot be adjusted. 4. Slide the center paper support halfway...
Page 21 - Never open the top cover or ink cartridge cover while printing.; Using the tear-off function; To tear off the printed sheet manually after printing, press the; Tear Off; button to advance the
❏ If the trailing edge of the paper is past the paper sensor after the printed document is torn off, thepaper will be fed forward without being printed. ❏ Do not pull the loaded paper out of the tractor unit. Doing so may cause paper jams or printermalfunctions. Also, the top-of-form position settin...
Page 22 - printed pages while holding the paper.; Removing continuous paper; Follow these steps to remove continuous paper from the printer.; button to feed the paper backward to the top-of-form position.
1. After printing is finished and the printer advances the paper to the tear-off position, tear off all printed pages while holding the paper. * perforation Note: The time until the paper begins to advance to the tear-off position after printing is finished can be set.To change the settings, see “Se...
Page 23 - Loading Special Paper; Labels; Follow these steps to load labels.; Ejecting labels; Always follow these steps to tear off and eject labels.
Loading Special Paper Labels You can use only labels with a continuous base sheet. Single-sheet labels cannot be used. Follow these steps to load labels. ! Caution: ❏ Use labels only under normal operating conditions because labels are especially sensitive totemperature and humidity. ❏ When using gl...
Page 24 - FF; Using the Micro Adjust Function; Adjusting the tear-off position; Pause
2. Press the FF button to eject the last label form forward. Using the Micro Adjust Function The Micro Adjust function allows you to move the paper forward or backward in 0.141 mm(1/180-inch) increments so that you can make precise adjustments to the top-of-form and tear-offpositions. Adjusting the ...
Page 25 - button to exit Micro Adjust mode.; button for about three seconds. The; light flashes, the printer enters; button to move the top-of-form position down on the page, or press the
Note: The printer has a minimum and a maximum tear-off position (up to 50.8 mm [2 inches] backwardor 25.4 mm [1 inch] forward). If you try to adjust the tear-off position beyond these limits, the printerbeeps and stops moving the paper. When the paper reaches the default tear-off position, the print...
Page 27 - Chapter 4; About Your Printer Software
Chapter 4 Printer Software About Your Printer Software The Epson software includes the printer driver and EPSON Status Monitor 3. The printer driver is software that allows your computer to control the printer. You need to install theprinter driver so your Windows applications can take full advantag...
Page 29 - Changing the printer driver settings; Printer Driver Settings Overview
2. Right-click your printer icon, and then click Printing Preferences . The Printing Preferences dialog box appears. The Main, Paper, Layout, and Utility menus in the dialog box contain theprinter driver settings. If you click Printer properties (Windows 8.1, 8, 7, Server 2012 R2, Server 2012, or Se...
Page 30 - Printer settings
Printer settings Settings Explanations Media Type Select the media type you want to use. Color This setting cannot be changed. The GP-C830/GP-C831/GP-C832 can print only in colorand the GP-M830/GP-M831/GP-M832 can print only in black and white. Mode* Select Automatic to print with the best settings ...
Page 31 - Adding custom paper sizes; For more information, see the online help for the printer driver.; Monitoring settings
Adding custom paper sizes If your paper is not included in the Paper Size drop-down list, you can add the size to the list. 1. For Windows 8.1, 8, Server 2012 R2, or Server 2012: Click Desktop on the Start screen, move the cursor to the top-right corner of the screen, click Settings , and then click...
Page 32 - Using EPSON Status Monitor 3; EPSON Status Monitor 3 is available when:; Setting up EPSON Status Monitor 3; Follow these steps to set up EPSON Status Monitor 3.; Desktop; from the; Hardware and Sound
Settings Explanations Monitoring Preferences Click this button to open the Monitoring Preferences dialog box where youcan make settings for EPSON Status Monitor 3. For more information, see“Setting up EPSON Status Monitor 3” on page 32. Using EPSON Status Monitor 3 EPSON Status Monitor 3 allows you ...
Page 34 - Click; Accessing EPSON Status Monitor 3; Do one of the following to access EPSON Status Monitor 3:
Select Notification Displays the error item check box On/Off status. Select this check box to display the selected error notification. Select Shortcut Icon The selected icon is displayed on the taskbar. The setting’s example is shown onthe right window. By clicking the shortcut icon, you can access ...
Page 35 - Printing barcodes or 2D symbols
You can check the printer status in this window. Note: It might not be possible to retrieve the printer status during printing. In this situation, click the EPSON Status Monitor 3 button in the Utility tab, and use the printer with the status window left open. Printing barcodes or 2D symbols The pri...
Page 36 - Setting barcode fonts or 2D symbol fonts; Access the printer driver. See “Using the Printer Driver” on page 27.; Utility; tab, and then click; Barcode and 2D Symbol; For more information about these settings, see the online help.; Add; You can add up to 30 barcode fonts and 2D symbol fonts.; OK; Printing barcode fonts or 2D symbol fonts
Setting barcode fonts or 2D symbol fonts Before printing barcodes or 2D symbols, specify the font type, the font size, and so on, with the printerdriver. 1. Access the printer driver. See “Using the Printer Driver” on page 27. 2. Click the Utility tab, and then click Barcode and 2D Symbol . 3. Set e...
Page 37 - Setting the Auto Tear-Off Function; Setting whether the buzzer sounds when printing is finished
Note: ❏ Specify the font size that is set with the Specified Point for the barcode. If other font sizes are specified, the barcode cannot be printed. ❏ When printing and using barcodes, make sure that they can be scanned correctly under the actualusage conditions. Setting the Auto Tear-Off Function ...
Page 38 - Setting whether the buzzer sounds when an error occurs; Using Reduce Scraping Mode
Setting whether the buzzer sounds when an error occurs 1. Access the printer driver. See “Using the Printer Driver” on page 27. 2. Click the Utility tab, and then click the Notification Setting button. 3. Select Beep to have the buzzer sound when an error occurs, or select No Beep to have the buzzer...
Page 39 - USB Replacement Service; Installing USB Replacement Service; Follow these steps to install USB Replacement Service.
To adjust the print position to the left when viewed from the front of the printer, set a positivevalue. To adjust the print position to the right, set a negative value. 4. Click OK . Note: Data that is outside the printable area due to the print position adjustment cannot be printed. USB Replacemen...
Page 40 - Replacing a USB-connected printer; tab, and then write down the current settings for; BI Parallel Port Driver
3. Insert the printer software CD-ROM in the CD-ROM drive. Note: ❏ If the language selection dialog box appears, select your language. ❏ If the EPSON Installation Program dialog box does not appear automatically, double-click the My Computer icon, right-click the CD-ROM icon, click OPEN in the menu ...
Page 41 - EpsonNet Config
This software is installed automatically when the printer driver is installed. Specify the following settings to communicate at high speed. 1. For Windows 8.1, 8, Server 2012 R2, or Server 2012: Click Desktop on the Start screen, move the cursor to the top-right corner of the screen, click Settings ...
Page 42 - Installing EpsonNet Config; Follow these steps to install EpsonNet Config.; Next; When the installation is complete, click
❏ You can output configuration information for the network printer as a SYLK format file. Becausethe SYLK format is supported by Microsoft Excel, the user can make batch settings or changes tothe configuration information for multiple printers. ❏ Previous configuration information is stored as a log...
Page 43 - Sharing the printer; Setting the printer server; See “Setting up your printer as a shared printer” on page 44.; Setting the clients; See “Setting the clients” on page 47.
EPSON Printer Setting EPSON Printer Setting allows you to change the printer's default settings. This tool is included in the printer software CD-ROM. Start the tool from the printer softwareCD-ROM. To change the settings, see the online help for EPSON Printer Setting. Setting Up Your Printer on a N...
Page 44 - Setting up your printer as a shared printer
❏ The screen shots that are shown on the following pages may differ depending on the version ofWindows that you are using. Setting up your printer as a shared printer Note: You must log on to the printer server computer as the administrator. 1. For Windows 8.1, 8, Server 2012 R2, or Server 2012: Cli...
Page 45 - , and then type the name in the Share name box and click; Share this printer
In either case, follow the on-screen instructions. 3. For Windows 8.1, 8, 7, Vista, XP, Server 2012 R2, Server 2012, Server 2008 R2, Server 2008, or Server 2003:Select Share this printer , and then type the name in the Share name box and click OK . Note: ❏ Do not use spaces or hyphens for the shared...
Page 46 - Sharing the printer when the firewall is on; Windows Vista or Server 2008
Sharing the printer when the firewall is on Note: To share files and printers when the Windows firewall is on, perform the following procedure. Windows 8.1, 8, Server 2012 R2, or Server 2012 1. Click Desktop on the Start screen, move the cursor to the top-right corner of the screen, click Settings ,...
Page 49 - Canceling Printing; Using the printer button
5. Enter the following information for the port name, and then click OK . \\Name of computer connected to the target printer\name of shared printer 6. After returning to the Printer Ports dialog box, click Close . 7. Check that the name you entered for the port has been added and selected, and then ...
Page 50 - Uninstalling the Printer Software; Uninstalling the printer driver and utilities
When canceling all printing documents, select Cancel All Documents on the Printer menu. When canceling a specific document, select the document you want to cancel, and then select Cancel on the Document menu. The print job is canceled. Uninstalling the Printer Software When you want to reinstall or ...
Page 52 - or
5. Click the Printer Model tab, select the icon of the printer you want to uninstall, and then click OK . Note: ❏ EPSON Status Monitor 3 is uninstalled with the printer driver. EPSON Status Monitor 3 cannotbe uninstalled separately. ❏ USB Replacement Service and BI Parallel Port Driver can be uninst...
Page 53 - Chapter 5; Using the Control Panel; Control panel buttons and lights; For Chinese users
Chapter 5 Control Panel Using the Control Panel You can control simple printer operations—such as advancing paper to the tear-off position, formfeeding, loading and ejecting paper, cleaning the print head, and canceling print jobs—with thebuttons on the control panel. The control panel lights show t...
Page 54 - Cover; On when the right/left ink cartridge cover or top cover is open.
For Taiwanese users GP-C830 GP-M830 For other users GP-C830/GP-C831 GP-M830/GP-M831 1. Cover light On when the right/left ink cartridge cover or top cover is open. GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide Control Panel 54
Page 57 - Chapter 6; Using the Error Indicators
Chapter 6 Troubleshooting Using the Error Indicators You can identify many common printer problems using the lights on the control panel. If your printerstops working and one or more control panel lights are on or flashing or the printer beeps, use thefollowing table to diagnose and fix the problem....
Page 59 - Problems and Solutions; Power supply; Power is not being supplied
Panel light state Beep pattern Problem Solution k On k Cover k Paper k Tear Off k Pause O O O O O A fatal error has occurred. Turn off the printer and check for a paper jam. If there is a paper jam,remove the jammed paper, and then turn on the printer. If the scale is dirty, clean it with a soft clo...
Page 60 - Printing; Printing or printout quality problems
The outlet may not be operating. If the electrical outlet is controlled by an outside switch orautomatic timer, use a different outlet. Plug another electricaldevice, such as a lamp, into the outlet to determine whether theoutlet is operating properly. Printing Printing or printout quality problems ...
Page 61 - Printed characters are not what you expected
Paper may be jammed. Turn off the printer and check for a paper jam. If there is a paperjam, remove the jammed paper, and then turn on the printer. If theproblem persists, turn off the printer, wait several minutes, andthen turn it on again. The beeper sounds five sets of five short beeps (twenty-fi...
Page 62 - Printing position problems; Paper handling; Paper loading or feeding problems
The software may not be properly configured. Check that the software is correctly configured for your printer. Printing position problems Printing starts too high or too low on the page, or the bottom part of one page is printed at the top of the nextpage. Cause What to do The top margin or top-of-f...
Page 63 - Network problems
The paper supply is obstructed. Make sure the paper supply is not obstructed by a cable or someother object. The tear-off position is not aligned correctly. Cause What to do The tear-off position setting is incorrect. Adjust the tear-off position using the Micro Adjust function. Formore information,...
Page 64 - Other problems; Correcting USB Problems; For details about your computer, contact your dealer.; Printer does not work correctly with the USB cable
Multiple users are logged on to a single computerat the same time. On a Windows 8.1/8/7/Vista/XP system with multiple users, acommunication error may occur when switching to a new userand starting a new print job while the print job for the previoususer is still printing. Make sure that the print jo...
Page 65 - Clearing Paper Jams; Pull paper straight out to remove it from the printer.
❏ If you are using a USB hub, connect the printer to the first tier of the hub, or connect the printerdirectly to the computer’s USB port. Clearing Paper Jams Follow these steps to clear a paper jam. ! Caution: Pull out the jammed paper gently. If you remove the jammed paper with force, torn pieces ...
Page 66 - Job Cancel; button to cancel printing.; button again to restart printing.
5. Remove the paper. Pull the continuous paper forward or backward out of the printer. Note: Pull paper straight out to remove it from the printer. 6. Open the top cover and make sure there is no paper left. 7. Attach the continuous paper to the tractor unit. See “Printing on Continuous Paper” on pa...
Page 67 - Chapter 7; Technical Support Web Site; Then, select the support section of your local Epson Web site.; Contacting Customer Support; Before Contacting Epson; Product model; About; Brand and model of your computer
Chapter 7 Where To Get Help Technical Support Web Site Epson’s Technical Support Web Site provides help with problems that cannot be solved using thetroubleshooting information in your product documentation. If you have a Web browser and canconnect to the Internet, access the site at: http://support...
Page 68 - Your computer operating system name and version; Help for Users in Australia; Your Dealer; The Helpdesk numbers are:
❏ Your computer operating system name and version ❏ Names and versions of the software applications you normally use with your product Help for Users in Australia Epson Australia wishes to provide you with a high level of customer service. In addition to yourproduct documentation, we provide the fol...
Page 69 - Information on product specifications, drivers for download; Help for Users in Hong Kong; Internet Home Page; Product information
Help for Users in Singapore Sources of information, support, and services available from Epson Singapore are: World Wide Web (http://www.epson.com.sg) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ),Sales Enquiries, and Technical Support via e-mail are a...
Page 70 - Help for Users in Malaysia; Help for Users in India
❏ Answers to Frequently Asked Questions (FAQs) ❏ Latest versions of Epson product drivers Users can access our World Wide Web home page at: http://www.epson.com.hk Help for Users in Malaysia Contacts for information, support, and services are: World Wide Web (http://www.epson.com.my) ❏ Information o...
Page 71 - Help for Users in Europe; Pan-European Warranty Document; Help for Users in North America; Internet Support
Help for Users in Europe Check your Pan-European Warranty Document for information on how to contact Epson Customer support. Help for Users in North America Epson provides the technical support services listed below. Internet Support Visit Epson’s support website for your printer (U.S. or Canada) fo...
Page 72 - Purchase Supplies and Accessories; Help for Users in Latin America
Purchase Supplies and Accessories You can purchase Epson ribbons at http://www.epson.com (U.S. sales) or http://www.epson.ca(Canadian sales).You can also purchase supplies from an Epson authorized reseller. To find thenearest one, call 800-GO-EPSON (800-463-7766). Help for Users in Latin America Eps...
Page 73 - Purchase supplies and accessories
Country Telephone Dominican Republic* 1-888-760-0068 Ecuador* 1-800-000-044 El Salvador* 800-6570 Guatemala* 1-800-835-0358 Honduras** 800-0122 Code: 8320 Mexico Mexico City Other cities (52 55) 1323-2052 01-800-087-1080 Nicaragua* 00-1-800-226-3068 Panama* 00-800-052-1376 Peru Lima Other cities (51...
Page 74 - Chapter 8; Replacing the Ink Cartridges; Genuine Epson ink cartridges; Your printer uses the following ink cartridges:; Checking the ink cartridge status; To check the ink cartridge status, do one of the following:
Chapter 8 Consumables Replacing the Ink Cartridges Genuine Epson ink cartridges When replacement of any of the ink cartridges is required, you cannot print. Genuine Epson inkcartridges are designed and manufactured to work properly with your Epson printer. They ensureproper operation and long life o...
Page 75 - Open the printer driver, click the; tab, and then click the; A graphic displays the ink cartridge status.
❏ Open the printer driver, click the Utility tab, and then click the EPSON Status Monitor 3 button. A graphic displays the ink cartridge status. Note: If any of the ink cartridges installed in the printer is broken, incompatible with the printer model, orimproperly installed, EPSON Status Monitor 3 ...
Page 76 - Precautions on ink cartridge replacement
❏ The progress meter appears automatically when you start a print job. Note: To display the progress meter automatically, click the Utility tab in the printer driver dialog box, click Other Config , and then select the Show Progress Meter check box. Precautions on ink cartridge replacement Read all ...
Page 77 - Cleaning; button for
❏ For maximum ink efficiency, only remove an ink cartridge when you are ready to replace it. ❏ Do not refill the ink cartridges. Other products not manufactured by Epson may cause damagethat is not covered by Epson’s warranties, and under certain circumstances, may cause erraticproduct behavior. ❏ K...
Page 78 - When the printer is turned off using the; button, the print head is automatically covered to; On; button. Do not unplug the power cord or turn off the; Replacing an ink cartridge; Follow these steps to replace an ink cartridge.
❏ When the printer is turned off using the On button, the print head is automatically covered to prevent the ink from drying. If you will not use the printer after installing the ink cartridges, makesure to turn off the printer using the On button. Do not unplug the power cord or turn off the circui...
Page 79 - Push in the used cartridge so the cartridge pops out slightly.
2. Open the ink cartridge cover. Note: Wait for four seconds or more before removing the ink cartridge. Otherwise, ink may squirt. 3. Push in the used cartridge so the cartridge pops out slightly. GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide Consumables 79
Page 83 - Chapter 9; Printer Parts
Chapter 9 Product Information Printer Parts a. top cover b. control panel c. ink cartridge cover (left) d. output tray e. ink cartridge cover (right) a. center paper support* b. paper sensor GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide Product Information 83
Page 84 - Printer Specifications; Mechanical
c. sprockets* d. connector cover e. power plug connector f. USB interface connector g. parallel interface connector h. ethernet interface connector i. cable holders * tractor unit parts Printer Specifications Mechanical Printing method: Serial ink jet Printing speed: Print quality:Super Draft/Draft ...
Page 86 - Electronic; For the Ethernet cable, use a cable with CAT5e shielding.
Ink cartridges: Color: GP-C830/GP-C831/GP-C832 Black, Yellow, Magenta, Cyan Color: GP-M830/GP-M831/GP-M832 Black Cartridge life Use within 6 months afterinstalling in the printer. Temperature Operation:10 to 35 ˚C (50 to 95 ˚F) Electronic ! Caution: For the Ethernet cable, use a cable with CAT5e shi...
Page 91 - Electrical
For other users Bitmap fonts:EPSON Draft 10, 12, 15 cpiEPSON Roman 10, 12, 15 cpi, proportionalEPSON Sans Serif 10, 12, 15 cpi, proportionalEPSON Courier 10, 12, 15 cpiEPSON Prestige 10, 12 cpiEPSON Script 10 cpiEPSON OCR-B 10 cpiEPSON Orator 10 cpiEPSON Orator-S 10 cpiEPSON Script C proportional Sc...
Page 92 - Environmental; Paper; Width
AC power consumption Approx. 33 W (ISO24712 pattern) Approx. 8 W in standby mode Approx. 2.9 W in sleep mode* Approx. 0.2 W in power-off mode * When three minutes pass in the following conditions, the printer enters sleep mode. - No error- There is no data in input buffer- Ink cartridge covers are c...
Page 93 - Use only labels that are designed for use with ink jet printers.
Labels (continuous base sheet): Label size 38.1 mm (1.5 inches) in height, minimum50.8 mm (2.0 inches) in width, minimum2.5 mm (0.1 inch) corner radius Base sheet width 76.2 to 241.3 mm (3.0 to 9.5 inches) Base sheet length 38.1 to 558.8 mm (1.5 to 22.0 inches) Base sheet thickness 0.076 to 0.14 mm ...
Page 95 - Printable area
C 2 mm (0.079 inch) Printable area Continuous paper: A The minimum top and bottom margins above and below the perforation are 2.0 mm (0.079inch) each. B The minimum left and right margins are 13 mm (0.51 inch) each. The maximum paper width is 241.3 mm (9.5 inches) and the maximum printable width is2...
Page 96 - AC Adapter Electrical Specifications
Label (continuous base sheet): A 2 mm (0.0787 inch) or more B 12.7 mm (0.5 inch) or more C 2 mm(0.0787 inch) or more D 1.5 mm (0.0591 inch) or more AC Adapter Electrical Specifications Use the specified AC Adapter (EPSON AC Adapter K, Model: M248A) only. Input Rated voltage AC 100 to 240 V Rated fre...
Page 97 - Command Lists; Your printer supports the ESC/P control codes listed below.
Command Lists Your printer supports the ESC/P control codes listed below. ESC/P control codes Selecting an ESC/P printer in your software allows you to use advanced fonts and graphics. General operation: ESC @, ESC U Paper feeding: FF, LF, ESC 0, ESC 1, ESC 2, ESC 3, ESC A, ESC+, CR Page format: ESC...
Page 98 - Character Tables; You can select the character tables and character sets below.
ESC * Graphics: ESC K, ESC L, ESC Y, ESC Z, ESC ^ Bar code: ESC (B Character Tables You can select the character tables and character sets below. Character tables: For Indian users One Italic and 17 graphical character tables:Italic table, PC437 (US, Standard Europe), PC850(Multilingual), PC860 (Por...
Page 99 - Standards and Approvals
One Italic and eight graphical character tables:Italic table, PC437 (US, Standard Europe), PC850(Multilingual), PC860 (Portuguese), PC863(Canadian-French), PC865 (Nordic), PC858 (MultilingualEuro), GB18030 For other users Standard version:One Italic and 12 graphical character tables:Italic table, PC...
Page 100 - Taiwan; EMC; North America; EMI; FCC compliance statement for United States users; This Class A digital apparatus complies with Canadian ICES-003.
❏ This is a Class A product. In a domestic environment this product may cause radio interference inwhich case the user may be required to take adequate measures. ❏ The connection of a non-shielded printer interface cable to this printer will invalidate the EMCstandards of this device. ❏ You are caut...
Page 101 - Checking the Print Head Nozzles; Using the Nozzle Check utility for Windows; Follow these steps to use the Nozzle Check utility.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Europe EMC Directive 2004/108/EC EN 55022 Class AEN 55024 IEC 61000-4-2IEC 61000-4-3IEC 61000-4-4IEC 61000-4-5IEC 61000-4-6IEC 61000-4-11 Oceania EMI AS/NZS CISPR22 Class A Checking the Print Head Nozzles If you find th...
Page 102 - Using the control panel
3. Access the printer driver. See “Using the Printer Driver” on page 27. 4. Click the Utility tab, and then click the Nozzle Check button. 5. Follow the on-screen instructions. Using the control panel Follow these steps to check the print head nozzles using the control panel. 1. Make sure that paper...
Page 103 - Cleaning the Print Head; Using the Head Cleaning utility for Windows
Cleaning the Print Head If you find that the printout is unexpectedly faint or that dots are missing, you may be able to solvethese problems by cleaning the print head, which ensures that the nozzles are delivering ink properly. You can clean the print head from your computer using the Head Cleaning...
Page 105 - Aligning the Print Head; Adjusting the media feed; Make sure that no lights are indicating errors.; Print Head Alignment; Adjusting the bi-directional printing; Follow these steps to use Bi-D Adjustment.
❏ If print quality remains a problem, contact Epson Service Center. For more information, see“Contacting Customer Support” on page 67. ❏ To maintain print quality, Epson recommends printing a few pages on a regular basis. Aligning the Print Head Adjusting the media feed If you notice a misalignment ...
Page 106 - High Speed; Printing the Status Sheet; General information
! Caution: Do not turn off the printer while the printer is printing the adjustment patterns. Doing so maycause the printer to store incorrect settings. If you turned off the printer during the adjustmentprocess, start Bi-D Adjustment again. 1. Make sure that no lights are indicating errors. 2. Make...
Page 107 - Initializing the Network Setting
Network settings The information for the network settings, such as the MAC address, IP address, and security settings,are printed on the status sheet. 1. Make sure that paper is attached to the tractor unit and that the printer is turned on. 2. Press the Tear Off button and Load/Eject button at the ...
Page 108 - Cleaning the outer case; Turn off the printer and remove any paper loaded in the printer.; Cleaning the inside of the printer; Do not use a hard or abrasive brush.
Cleaning the outer case ! Caution: ❏ Never use alcohols or thinners to clean the printer; these chemicals can damage the printercomponents as well as the case. ❏ Be careful not to get water onto the printer mechanism or electronic components. 1. Turn off the printer and remove any paper loaded in th...
Page 109 - Slide the right sprocket unit completely to the left.
! Caution: ❏ When cleaning the printer using a brush, be careful not to touch the linear scale or thecarriage shafts with the brush and make sure that dust does not adhere to the shafts.Otherwise, the print quality may be adversely affected. ❏ Do not brush any dust toward the print head. Brush dust ...
Page 110 - Cleaning the paper feed rollers; Turn off the printer and attach the paper to the tractor unit.
! Caution: When cleaning the scale, be careful not to touch or damage the linear scale or the carriageshafts. * scale** linear scale*** carriage shaft Cleaning the paper feed rollers Dirty paper feed rollers may cause paper jams or dirty printouts. Follow these steps to clean the paperfeed rollers. ...
Page 111 - Transporting the Printer
6. Hold down the Pause button for about three seconds. The Pause light flashes and the printer enters Micro Adjust mode. 7. Clean the paper feed rollers with a cotton-tipped applicator dampened with alcohol (ethanol or isopropyl alcohol). Press the FF button or Load/Eject button to rotate the roller...
Page 113 - Copyright and Trademarks
Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko EpsonCorporation. The information contained he...
Page 114 - GNU GPL; The list of GPL Programs:; GNU LGPL; The list of LGPL Programs:
3. The open source software programs are WITHOUT ANY WARRANTY; without even theimplied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE. See the license agreements of each open source software program for more details,which are described on \Manual\OSS\OSS.pdf in the Utility & Doc...
Page 116 - Operating System Versions
Operating System Versions In this manual, the following abbreviations are used. Windows refers to Windows 8.1 , 8 , 7 , Vista , XP , Server 2012 R2 , Server 2012 , Server 2008 R2 , Server 2008 , and Server 2003 . ❏ Windows 8.1 refers to Windows 8.1, Windows 8.1 Pro, and Windows 8.1 Enterprise. ❏ Win...