Epson ELPMB24- Installation Manual

Page 2 - Safety Instructions; Explanation of Symbols; Warning

2 Safety Instructions For your safety, read the all instructions in this manual before using the wall mount. Incorrect handling that ignores instructions in this manual could damage the mount or could result in personal injury or property damage. Keep this instruction manual at hand for later refere...

Page 3 - English; Before Usage; Features; Place to Install the Mount; Caution

3 English Before Usage This product is for mounting an Epson Multimedia Projector on a wall. Features This mount is for short throw projector EB-410W/PowerLite 410W. Place to Install the Mount Perform the power engineering work in advance to the place where the mount is installed. Do not install the...

Page 4 - Package Contents

4 Package Contents Use the bolts supplied with this mount to install it, as directed in this manual. Do not substitute these bolts with any other types. In addition, you need to use M8 × 50 mm anchors (at least 3 pcs.) and 8 × 80 mm lag bolts (at least 3 pcs.) that are available at the store to atta...

Page 5 - Specifications

5 English Specifications Mass Approx. 9 kg (20 lb) Arm length Approx. 1240 mm (48.8 in.) (maximum) Vertical slide adjustment range 0 to 140 mm (5.5 in.) Vertical tilt adjustment range 0 to ± 7 ° Horizontal rotation adjustment range 0 to ± 5 ° Horizontal roll adjustment range 0 to ± 5 ° Horizontal sl...

Page 6 - Screen Size and Projection Distance

6 Screen Size and Projection Distance Refer to the table below and install the mount and projector to project images with appropriate size. The value is only as a guide.The recommended projection distance is 69 to 119 cm (27 to 47 in.). * Product names are the trademarks or registered trademarks of ...

Page 7 - Assembly and Installation; Installing the wall plate to the wall

7 English Assembly and Installation Make sure to follow the steps below to install the mount. If you ignore these steps, the mount could fall down and could cause personal injury or property damage. 1. Installing the wall plate to the wall Fit the wall plate to the wall using M8 × 50 mm anchor (more...

Page 8 - Attaching the arm unit to the wall plate; Attaching the projector plate to the projector

8 2. Attaching the arm unit to the wall plate 1) Route the cables through the arm unit as shown below. 2) Attach the hook on the arm plate to the bar on the wall plate.Be careful not to pinch cables between the arm plate and the wall plate. 3) Secure the arm plate temporarily using two M8 × 16 mm he...

Page 9 - Installing the projector on the wall mount; Adjusting the length of the arm; Connecting the power cable and other cables to the projector

9 English 4. Installing the projector on the wall mount 1) Slide the projector plate onto the adjustment unit as shown below. 2) Secure the projector temporarily using two M4 × 12 mm bolts as shown below. 5. Adjusting the length of the arm 1) Loosen the screw on the arm. ( ) 2) Adjust the length of ...

Page 10 - Turning on the projector and checking the screen

10 7. Turning on the projector and checking the screen 1) Loosen the screws on the adjustment unit (A, B, C, and D) as shown below to adjust the screen position. 2) If you project a 16:9 image at the minimum or maximum distance for your screen size, adjust the vertical slide (arm angle) using two sc...

Page 11 - Attaching the protective covers

11 English 8. Attaching the protective covers Attach the wall plate cover, cable cover, and arm cover using the hexagon wrench (M4) and six M4 × 12 mm bolts. Only a specialist should remove or install the projector, including for maintenance and repairs. See User's Guide of your projector for instru...

Epson ELPMB24- Installation Manual

Table of Contents:

Other Manuals for Epson ELPMB24

Summary

Other Epson Models