Emerson 1F95EZ-0671 - Manual
Emerson 1F95EZ-0671 Thermostat – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OFF; WIRING CONNECTIONS; Power Stealing Switch; Rear view of thermostat; TERMINAL DESIGNATION DESCRIPTIONS; RC; Thermostat Power Method
- Page 3 – WIRING DIAGRAMS; Figure 4 – Heat Pump Systems; Pump Connections; c system wiring information.; with Two Transformers
- Page 4 – Programming and Confi guration Items; THERMOSTAT QUICK REFERENCE; Home Screen Description; Figure 6 – Home Screen Display; Room; Change; The batteries should
- Page 5 – INSTALLER/CONFIGURATION MENU; to change a menu item options.
- Page 6 – MODE
- Page 8 – No Heat; Set System to; HEAT; and raise the setpoint; COOL; and lower the setpoint below the; ON; for slow cycle in the; and; TROUBLESHOOTING
Model
Programming Choices
1F95EZ-0671
Non-Programmable
7 Day
Blue Easy Reader Ther mostat
www.white-rodgers.com
PART NO. 37-6986A
0846
Single Stage, Multi-Stage, Heat Pump
Installation and Operating Instructions for Model:
APPLICATIONS
THERMOSTAT APPLICATION GUIDE
1F95EZ-0671 Thermostat
SPECIFICATIONS
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this
product may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For
proper disposal of a product containing mercury or a
sealed container of spilled mercury, place it in a suitable
shipping container. Refer to
www.white-rodgers.com
for
location to send product containing mercury.
Index
Page
Installation
2
Wiring Connections
2
Wiring Diagrams
3
Thermostat Quick Reference
4
Installer Confi guration Menu
5
Operating Your Thermostat
7
Troubleshooting
8
Electrical Rating:
Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 to 99°F (7 to 32°C)
Differential (Single Stage) . . . . . . . . . . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Differential (Multi-Stage) . . . . . . . . . . . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Differential (Heat Pump) . . . . . . . . . . . . . . . . . . . . . Heat 1.2°F; Cool 1.2°F
Operating Ambient . . . . . . . . . . . . . . . . . . . . . . . . . . 32°F to +105°F (0 to +41°C)
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . . . . . . . . . . . -40 to +150°F (-40 to +65°C)
Dimensions Thermostat . . . . . . . . . . . . . . . . . . . . . . 4.2"H x 6.4"W x 1.7"D
Thermostat
Confi guration Options
Thermostat
Applications
Maximum
Stages
Heat/Cool
Single Stage 1
No Heat Pump (SS1)
Gas, Oil, Electric, Heat Only,
Cool Only or Heat/Cool
Systems, 2 or 3 wire Hydronic
Zone (Hot Water or Steam)
Systems, 24 Volt or Millivolt
1/1
Multi Stage 2
No Heat Pump (MS2)
2/2
Heat Pump 1
Single Stage Compressor
Heat Pump (HP1)
Single Stage Compressor
Heat Pump Systems - up to 2
Stages Aux./Emergency Heat
3/1
Heat Pump 2
Two Stage or Two
Compressor Heat Pump
(HP2)
Two Stage or Two Compressor
Heat Pump systems - up to 2
Stages Aux./Emergency Heat
4/2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Emerson 1F95EZ-0671
Summary
2 Remove Old Thermostat Before removing wires from old thermostat, mark wires for terminal identifi cation so the proper connections will be made to the new thermostat. Installing New Thermostat 1. Pull the thermostat body off the thermostat base. Forcing or prying on the thermostat will cause damag...
3 WIRING DIAGRAMS Figure 4 – Heat Pump Systems Figure 2 – Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer Heat Pump 1 (HP1) Heat Pump 2 (HP2) O Energized in Cool Mode B Energized in Heat, Off, Emergency Mode NoOutput 2ndStage(Com-pressor) Heat andCool Mode1st Stage(Compress...
4 Programming and Confi guration Items 1 “Heat" “A/C” “Off” identi fi es button. When fi lled indi- cates system mode selected. 2 "Aux" inidicates thermostat con fi gured for Heat Pump. When fi lled indicates Auxiliary stage is operating. 3 "Adv Day" identi fi es button when in s...
