Electrolux EWF1041ZDWA - User Manual

8 www.electrolux.com Drain Pump Filter Door Drain Pump Filter Detergent dispenser with AutoDose tanks and manual compartments Transit Bolt (when remove) Transit bolts must be removed before using the appliance. Drain Pump Filter (when open) Level Adjustment Feet Drum Lifter Stainless Steel Washing D...

10 www.electrolux.com 2.4 The Autodose Technology (Autodosing) Introduction Using the right amount of detergent and fabric softener not only improves the wash performance of your machine it is also beneficial for your clothes and environment by avoiding excessive detergent usage.This appliance is eq...

11 3. CONTROL PANEL 3.1 Control Panel Description Delay End IconTemperature (“ ” represents Cold water)Door Lock IconProgram Duration / Delay End Time / Alarm CodeRemote Icon ( Wi-Fi connection indicator, Remote connection indicator.)Add Clothes IconAutoDose IconMaximum Load Capacity of Selected Pro...

12 www.electrolux.com Program; Temperature range 1200 rpm 2 kg 1200 rpm 4 kg – – Type of load and soil level Max. Spin Speed Max. Load (Dry Clothes) Cold to 40°C Cold to 40°C Specially tested program for woollen garments bearing the “Pure new woollen, non-shrink, machine washable” label. Delicates; ...

15 Delay End ( ) Touchpad Before you start the program, this option makes it possible to define the end of the washing program from minimum of 1 hour to maximum of 20 hours. If program duration is longer than 3 hours, minimum Delay End option starts from 4 hours. After selecting Delay End time, pres...

16 www.electrolux.com Stain Touchpad Extra Rinse Touchpad Press this touchpad to add the stain phase to a program. The indicator of this option comes on. Use this function for laundry with hard to remove stains. You have 2 choices for adding stain remover: Detergent for Prewash phase. This option is...

17 3.5 Settings Child Safety Lock ( ) Option Program settings that are frequently used can be saved (e.g. Cotton, 60°C, 1200 rpm, with Prewash and Vapour). To program/re-program Favourite with your own selections and save them, proceed as follows: • At the end of the Vapour cycle, the clothes will b...

18 www.electrolux.com This touchpad has 2 functions: Start/Pause ( ) 1. To interrupt a program which is running, press this touchpad to pause the machine, the Start/Pause pilot light flashes. After you have selected the desired program and options, press this touchpad to start the machine. If you ha...

19 Press the On/Off button to turn on the washing machine. Turn the knob to set a program. The washing machine will propose a temperature and automatically select the spin value provided for the program you have chosen. Check and remove objects (if there are any) that could be trapped in the fold. 1...

20 www.electrolux.com When using liquid detergent (Manual compartment), make sure that the special container for liquid detergent is inserted. Refer to the “Manual filling the detergent and additives” paragraph in this chapter. Maximum level for detergent/ additives quantity. (*) By factory default,...

21 Please read “Detergents Type And Quantity Of Detergent” on page 29.We recommend that you do not exceed the maximum indicated level ( ). Filling the detergent and additives on AutoDose system 1. Open the detergent dispenser. 2. Lift up the AutoDose cover lid. 3. Gently pour only liquid detergent i...

22 www.electrolux.com Fine-tuning settings is not “permanent”, and will return to normal dose after the cycle ends. Fine-tuning settings is not “permanent”, and will return to normal dose after the cycle ends. AutoDose Softener ( ) touchpad is disabled in this mode, the display will show “- - - ” wh...

23 Fine-tuning settings is not “permanent”, and will return to normal dose after the cycle ends. Fine-tuning settings is not “permanent”, and will return to normal dose after the cycle ends. AutoDose Softener touchpad is disabled in this mode, the display will show “- - - ” when touched it. In Link ...

26 www.electrolux.com The appliance will automatically adjust the selected program duration according to the type and size of the load. − The display will show adjusted program duration. − To start a program, press the Start/Pause touchpad. The corresponding pilot light will stop flashing and a defa...

28 www.electrolux.com Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 90°C Temp Soil level 60°C 50°C 40°C 30°C Cold For normally soiled, colourfast garments (e.g. shirts, ...

30 www.electrolux.com the washload to turn grey, greasy clothes. inadequate rinsing. reduced washing effect, you are washing a small load, large amounts of foam during washing. the laundry is lightly soiled, Use less detergent if: These symbols appear on fabric labels, in order to help you choose th...

33 If some residues remain on the back area of tanks, soak detergent drawer in a warm water. Do not use tools to clean it. Before soaking, remove the handle by pressing the red button and slide the handle as indicated in the picture. WARNING! 9. Make sure that all detergent residue is removed from t...

35 ● ● Disconnect the mains plug from the mains socket. WARNING! Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump. To clean the drain pump: 1. Open the drain pump door. ...

37 8.8 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain 1. Disconnect the main plug from the main socket. Turn off the water tap. 2. Remove the water inlet hose.3...

38 www.electrolux.com The door has not been closed. (Error code: ) Close the door firmly. The plug is not properly inserted into the power socket. Insert the plug into the power socket. There is no power at the socket. Please check your domestic electrical installation. The Start/Pause touchpad has ...

41 Malfunction Possible cause Solution Detergent over dose. Reduce the detergent quantity or use another one. Machine unbalance. Redistribute laundry manually in the drum and start the spin phase again. The laundry is not evenly distributed in the drum. Pause the machine and redistribute laundry man...

45 Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents vibration, noise and the movement of the appliance when in operation. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Install the ...

46 www.electrolux.com Fitting Hose Guide bend hose 2. Adjust length to suit trough. Pull apart to insert hose. pull hose 1. 450 approx . Hose Guide Push the drain hose onto the spigot and secure with a clamp, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appli...

47 Fitting Hose Guide bend hose 2. Adjust length to suit trough. Pull apart to insert hose. pull hose 1. 450 approx . Hose Guide Push the drain hose onto the spigot and secure with a clamp, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appliance. In a sink, dr...

48 www.electrolux.com 13.1 Installing and configuring “Electrolux Life” App. 13. WI-FI CONNECTIVITY SETUP This chapter describes how to connect the smart appliance to the Wi-Fi network and to link it to a mobile devices.By this functionality you can monitor and control your laundry appliance from yo...

49 For iOS devices, you will then be prompted go to “SETTINGS” on your phone and select your Home Wi-Fi, then return to the Electrolux Life App. Every time you switch the washing machine on, the machine takes 45 seconds to connect to the network automatically. When the indicator stops blinking the c...