Dewalt DCS393- User Manual

Dewalt DCS393

Dewalt DCS393– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – English; KERF
  • Page 3 – WALT; General Power Tool Safety Warnings
  • Page 4 – ) POWER TOOL USE AND CARE
  • Page 5 – CAUSES AND OPERATOR PREVENTION OF KICKBACK:
  • Page 6 – LOWER GUARD SAFETY INSTRUCTIONS
  • Page 7 – • Avoid cutting nails.
  • Page 9 – WALT and other battery users, has
  • Page 10 – Not Recommended; Chargers; Your tool uses a D
  • Page 11 – LEAVING THE BATTERY PACK IN THE CHARGER; Important Charging Notes; PACK CHARGING; Charge Indicators
  • Page 12 – Shock hazard. Don’t allow any liquid to get inside the; Storage Recommendations; Never modify the power tool or any part of it. Damage; INTENDED USE; OPERATION; WARNING: To reduce the risk of serious personal injury,
  • Page 13 – This tool has no
  • Page 14 – Place outer clamp washer (P) on saw spindle with the large flat; SPINDLE
  • Page 15 – TIGHTEN; Clean any sawdust that may have accumulated in the guard or; LOWER BLADE GUARD; WARNING: The lower blade guard is a safety feature which; Further Safety; . If the lower blade guard is missing; Blades; To minimize the risk of eye injury, always use eye
  • Page 16 – Blade; KICKBACK; Cutting Depth; MATERIALS THAT REQUIRE EXTRA ATTENTION
  • Page 17 – LIFTING THE SAW WHEN MAKING A BEVEL CUT; Further Safety Instructions for All Saws; TO SET THE SAW FOR A BEVEL CUT
  • Page 18 – an actual cut on a scrap piece of material.; To avoid kickback; , DO support board or panel; SUPPORT
  • Page 19 – When cutting thin strips, be careful to ensure that; INSTALL RIP FENCE; Never tie the
  • Page 20 – CHARGER CLEANING INSTRUCTIONS
Loading the manual

DCS391, DCS393
20V Max* 6-1/2" (165 mm) Cordless Circular Saw
Scie circulaire sans fil de 20 V max* 165 mm
Sierra circular inalámbrica de 20 V Máx* 165 mm

INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA.

ADVERTENCIA:

LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-D

E

WALT • www.dewalt.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - English; KERF

2 English DCS391, DCS393 20V Max* 6-1/2" Cordless Circular Saw 5250 RPM A. TRIGGER SWITCH LOCK-OFF BUTTON B. TRIGGER SWITCH C. BATTERY PACK D. DEPTH ADJUSTMENT KNOB E. SHOE F. LOWER BLADE GUARD RETRACTING LEVER G. LOWER BLADE GUARD H. BLADE CLAMPING SCREW I. KERF INDICATOR J. BEVEL ADJUSTMENT KN...

Page 3 - WALT; General Power Tool Safety Warnings

1 English 1) WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep chi...

Page 4 - ) POWER TOOL USE AND CARE

2 English 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious persona...

Other Dewalt Models

All Dewalt Other