DeLonghi DEGESC24SS - Manual
DeLonghi DEGESC24SS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WHAT TO DO IF YOU SMELL GAS:; • lmmediately call your gas supplier from a neighbor's phone.; IF THE INFORMATION IN THIS MANUAL IS NOT; WARNING; • ALL RANGES CAN TIP
- Page 4 – I N S TA L L AT I O N I N S T R U C T I O N S; TOOLS NEEDED FOR INSTALLATION
- Page 5 – GENERAL INFORMATION; Electrical Requirement; ELECTRICAL GROUNDING INSTRUCTIONS
- Page 6 – i n s t a l l a t i o n; PROXIMITY TO SIDE CABINETS
- Page 7 – It is mandatory to install the backguard
- Page 8 – LEVELLING THE RANGE; ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
- Page 9 – g a s c o n n e c t i o n; Explosion Hazard
- Page 10 – PRESSURE REGULATOR INSTALLATION; LOCK; Arrow
- Page 11 – Extension; GAS CONNECTION SPECIFICATION
- Page 13 – To remove the warming drawer:
- Page 15 – SETTING THE BURNER MINIMUM; INJECTORS TABLE; BURNERS
- Page 16 – e l e c t r i c a l c o n n e c t i o n; ELECTRICAL REQUIREMENTS; ELECTRICAL CONNECTION WITH POWER CORD
- Page 20 – WIRING DIAGRAM
IMPORTANT - PLEASE READ AND FOLLOW
✓
Before beginning, please read these instructions completely and carefully.
✓
Do not remove permanently affixed labels, warnings, or plates from the product. This
may void the warranty.
✓
Please observe all local and national codes and ordinances.
✓
Please ensure that this product is properly grounded.
✓
The installer should leave these instructions with the consumer who should retain
for local inspector's use and for future reference.
Installation must conform with local codes or in the absence of codes, the National Fuel
Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with the
National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN CANADA:
Installation must be in accordance with the current CAN/CGA-B149.1 National Gas
Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.
Electrical installation must be in accordance with the current CSA C22.1 Canadian
Electrical Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with
the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-
merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part
280)] or, when such standard is not applicable, the Standard for Manufactured Home
Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with
state or other codes or, in the absence of such codes, with the Standard for Recreational
Park Trailers, ANSI A119.5.
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual
gas shut-off valve must be installed in the gas supply line ahead of the appliance in the gas
stream for safety and ease of service.
If an external electrical source is utilized, the appliance, when installed, must be electrical-
ly grounded in accordance with local codes or, in the absence of local codes, with the
national Electrical Code, ANSI/NFPA 70.
This range is supplied with a protective film on
steel and aluminium parts.
This film must be removed before installing/using the appliance.
FOR INSTALLER ONLY
THIS RANGE IS FOR RESIDENTIAL USE ONLY
• INSTALLATION INSTRUCTIONS
IMPORTANT - PLEASE READ AND FOLLOW
GAS/ELECTRIC RANGE
for residential use only
Model:
DEGESC 24 SS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 ✓ Do not store or use gasoline or other flammable vapors and liquidsin the vicinity of this or any other appliance. ✓ WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance.• Do not touch any electrical switch; do not use any phone in your building. • lmmediately call your gas supplier f...
4 WARNING! THIS APPLIANCE HAS TO BE INSTALLED BY A QUALIFIED INSTALLER. Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult aqualified installer, service agent, or the gas supplier. IMPORTANT: The use of suitable protective clothing/gl...
5 GENERAL INFORMATION 1. Installation must conform with local codes or, in theabsence of local codes, with the National Fuel Gas Code , ANSI Z223.1-Latest Edition. 2. Installation in manufactured (mobile) home: installationmust conform with the Manufactured Home Construction and Safety Standard, Tit...
