Dell PowerEdge 1900 - Installation Manual

Dell PowerEdge 1900 – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 3 – Installing a SATA Optical Drive; Removing an Existing Optical Drive – All Systems; PowerEdge 1950 systems only:
Page 5 – Replacing the Optical Drive in a PowerEdge 2950 or 2970 System; Replacing a PowerEdge 1950 Optical Drive
Page 6 – Installing a SATA Optical Drive in a PowerEdge 1950 Drive Tray; Installing the SATA Optical Drive – PowerEdge 1950; Connect the branching power cable to the power supply connector.
Page 7 – SATA Cable Routing in the PowerEdge 1950; Hardware Owner’s; Installing the SATA Optical Drive – PowerEdge 2970 or 2950
Page 9 – Hardware Owner’s Manual; Installing the SATA Optical Drive – PowerEdge 2900 and 1900; Connect the SATA cable to the back of the optical drive.
Page 10 – Reconnect the cables to the SAS controller daughter card.; optical drive

Loading the manual

Dell™ PowerEdge™

19x0 and 29x0 Systems

Installing a SATA

Optical Drive

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Dell
Model: PowerEdge 1900
Document type: Installation Manual
Language(s): English
Pages: 10
File size: 200.8 KB
Format: PDF

Summary

Page 3 - Installing a SATA Optical Drive; Removing an Existing Optical Drive – All Systems; PowerEdge 1950 systems only:

Installing a SATA Optical Drive 3 Installing a SATA Optical Drive These instructions apply to Dell™ PowerEdge™ systems to which a SATA optical drive is being added, or in which an existing PATA or IDE optical drive is being replaced by a SATA optical drive. WARNING: Only trained service technicians ...

Page 5 - Replacing the Optical Drive in a PowerEdge 2950 or 2970 System; Replacing a PowerEdge 1950 Optical Drive

Installing a SATA Optical Drive 5 Figure 1-1. Replacing the Optical Drive in a PowerEdge 2950 or 2970 System Replacing a PowerEdge 1950 Optical Drive NOTE: The replacement drive tray provided in the installation kit must be used with PowerEdge 1950 systems. If you are replacing an existing optical d...

Page 6 - Installing a SATA Optical Drive in a PowerEdge 1950 Drive Tray; Installing the SATA Optical Drive – PowerEdge 1950; Connect the branching power cable to the power supply connector.

6 Installing a SATA Optical Drive Figure 1-2. Installing a SATA Optical Drive in a PowerEdge 1950 Drive Tray Installing the SATA Optical Drive – PowerEdge 1950 1 Insert the optical drive tray into the system until it is fully inserted and locked into position. 2 Connect the SATA cable (the end with ...