Daikin FTXS100KVMA- Installation Manual

5 English CAUTION After a long use, check the unit stand and fittingfor damage. If they are left in a damaged condition, the unit may fall and result in injury. Do not allow a child to mount on the unit or avoid placing any object on it. Falling or tumbling may result in injury. Do not let children ...

English 6 FEATURES AND FUNCTIONS • Room air conditioners and multi-purpose air conditioners may also be connected by using separately-sold adapter boards.This may limit functionality, so consult the manuals that come with each adapter board. Operation menu This central remote controller can operate ...

English 8 OPERATION 䡲䡲䡲䡲 Individual screen, all screen, zone screen (Fig. 3) This controller can perform operations in the individual screen, all screen, or zone screen. • Individual screen The individual screen is used when performing group opera-tions. • All screen The all screen is used when per-...

11 English 䡲䡲䡲䡲 Changing the fan direction and fan strength (Fig. 8) This changes the fan direction and strength settings in the air conditioner.Changing the fan direction and strength is done in the individual screen. [Registration] 1. Press the “ALL/INDIVIDUAL button” to enter the individual scree...

English 12 3. Select the desired timer number by pressing the “TIMER NO.” button. Once the desired timer number is displayed, press the “SET” button.The display for timer number 2 will stop blinking. The “ ” display will disappear after 3 seconds. Select “ ” in the timer number when you do not wish ...

13 English OPERATION MODE The following five operation control modes can be selected along with the temperature setting and operation mode by remote controller, for a total of twenty different modes. These twenty modes are set and displayed with control modes of 0 to 19. (For further details, see EX...

English 14 Note) Do not select the timer operation possible without the remote controller. In this case, timer operation is disabled. EXAMPLE OF OPERATION SCHEDULE Operation schedule is possible only in conjunction with the schedule timer (optional accessory). Liquid crystal display of schedule time...

15 English Remotecontroller Centralized Centralized Remotecontroller Centralized Remotecontroller Centralized Centralized Remotecontroller Centralized Remotecontroller Remotecontroller Centralized Remotecontroller - - - - - Operation Operation Operation Operation Operation Operation Stop Stop Stop S...

English 16 䡲䡲䡲䡲 Setting operation mode (Fig. 12) [Registration] 1. Press the OPERATION MODE SELEC- TOR BUTTON. Each time you press this button, the display rotates as shown on the below list. • List of operations which can be set In the below list, “ 䡬 ” refers to the acceptable set- ting, while “ ×...

21 English Call the unit whose system you wish to look up using the arrow keys. The “ ” on all groups in the same system as the displayed group will light up. Of those, the “ ” display in all groups which have cooling/heating selection privilege will blink. In this example, individual units 1-00, 1-...

English 22 INSTALLATION TABLE When installing the equipment, mark the zone No. of each group and installation location in the below table. Setting group No. (Setting is not possible unless power is activated to both the central remote controller and indoor unit.) Operated by remote controller 1. Act...

23 English OPTIONAL ACCESSORIES DOUBLE CENTRAL REMOTE CONTROLLERS Note) • For control alignment and settings for double central remote controllers, contact your dealer. Zone No. Group No. –00 –01 –02 –03 –04 –05 –06 –07 –08 –09 –10 –11 –12 –13 –14 –15 Indoor unitQuantity of unitsControlled by Locati...

English 24 SPECIFICATIONS 䡲䡲䡲䡲 Specifications 䡲䡲䡲䡲 Outline drawings When using this unit an electric parts box of KJB311AA is required.For installation, a steel electric parts box to be embedded is mandatory. Power supply 1 ~ 50/60Hz, 100V – 240V Power consumption Max. 8W Forced ON/OFF input Continu...