Daikin FLX35HVEA- User Manual

5 Name of Parts Indoor Unit Air inlet Front panel Air outlet Louvers (vertical blades) The louvers are inside of the air • outlet. Page 13 INTELLIGENT EYE sensor It detects the movements of • people and automatically switches between normal operation and energy saving operation. Page 15 Flaps (horiz...

6 Outdoor Unit Appearance of the outdoor unit may differ from some models. • Open the front panel „ Air fi lter Titanium apatite photocatalytic air-purifying fi lter Refrigerant piping and inter-unit wiring Earth terminal It is inside of this cover. • Drain hose Air inlet (back and side) Air outlet ...

7 Name of Parts Remote Controller Signal transmitter Receiver To use the remote controller, aim the • transmitter at the indoor unit. If there is anything to block signals between the unit and the remote controller, such as a curtain, the unit will not operate.Do not drop the remote controller. Do •...

8 Open the front cover „ ECONO button ECONO operation. • Page 19 SWING button Adjusting the air fl ow direction • . Page 13 : WEEKLY button : PROGRAM button : COPY button : BACK button : NEXT button WEEKLY TIMER operation. • Page 22 ON TIMER button Page 21 CLOCK button Page 10 SELECT button It chang...

9 Preparation before Operation „ To set the batteries 2 3 1 Position and correctly! + – Slide the front cover to take it off. 1. Set 2 dry batteries AAA.LR03 (alkaline). 2. Set the front cover as before. 3. „ To fi x the remote controller holder on the wall Remote controller holder Remote controller...

10 NOTE Note on setting the clock „ If the indoor unit’s internal clock is not set to the correct time, ON/OFF TIMER and WEEKLY TIMER will not operate punctually. • „ Turn the breaker on After the power is turned on, the fl aps of the indoor unit opens and closes once to set • the reference position...

11 AUTO · DRY · COOL · HEAT · FAN Operation The air conditioner operates with the operation mode of your choice.From the next time on, the air conditioner will operate with the same operation mode. „ To start operation Press 1. and select a operation mode. Each pressing of the button advances the mo...

12 „ To change the temperature setting Press or . The displayed items on the LCD will change whenever either one of the buttons is • pressed. COOL mode HEAT mode AUTO mode DRY or FAN mode 18 – 32°C 10 – 30°C 18 – 30°C The temperature setting is not variable. Press to raise the temperature and press ...

13 Adjusting the Air fl ow Direction and Rate You can adjust the air fl ow direction to increase your comfort. To start auto swing „ Upper and lower air fl ow direction Press . “ • ” is displayed on the LCD. The fl aps (horizontal blades) will begin to swing. • Right and left air fl ow direction Pre...

15 COMFORT AIRFLOW / INTELLIGENT EYE Operation COMFORT AIRFLOW operation „ The fl ow of air will be in the upward direction while in COOL operation and in the downward direction while in HEAT operation, which will provide a comfortable wind that will not come in direct contact with people. COOL oper...

16 „ To start operation Press and select the desired mode. Each time the • is pressed a different setting option is displayed on the LCD. By selecting “ • ” from the following icons, the air conditioner will be in COMFORT AIRFLOW operation combined with INTELLIGENT EYE operation. blank No Setting CO...

17 POWERFUL Operation POWERFUL operation quickly maximizes the cooling (heating) effect in any operation mode. You can get the maximum capacity. To start POWERFUL operation „ Press during operation. POWERFUL operation ends in 20 minutes. Then the system automatically operates • again with the previo...

18 OUTDOOR UNIT QUIET Operation OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by changing the frequency and fan speed on the outdoor unit. This function is convenient during the night. To start OUTDOOR UNIT QUIET operation „ Press . “ • ” is displayed on the LCD. To cancel ...

19 ECONO Operation ECONO operation is a function which enables ef fi cient operation by limiting the maximum power consumption value. This function is useful for cases in which attention should be paid to ensure a circuit breaker will not trip when the product runs alongside other appliances. To sta...

20 OFF TIMER Operation Timer functions are useful for automatically switching the air conditioner on or off at night or in the morning. You can also use OFF TIMER and ON TIMER in combination. To use OFF TIMER operation „ Check that the clock is correct. • If not, set the clock to the present time. P...

21 ON TIMER Operation To use ON TIMER operation „ Check that the clock is correct. • If not, set the clock to the present time. Page 10 Press 1. . “ ” is displayed on the LCD. “ ” blinks. “ • ” and day of the week disappear from the LCD. Press 2. until the time setting reaches the point you like. Ea...

22 WEEKLY TIMER Operation Up to 4 timer settings can be saved for each day of the week. It is convenient if the WEEKLY TIMER is set according to the family’s life style. Using in these cases of WEEKLY TIMER „ Example: The same timer settings are made for the week from Monday through Friday while dif...

23 WEEKLY TIMER Operation „ To use WEEKLY TIMER operation Setting mode Make sure the day of the week and time are set. If not, set the day of the week and time. • Page 10 6:00 8:30 17:30 22:00 25°C 27°C Program 1 Program 2 Program 3 Program 4 ON OFF ON OFF [Monday] Setting Displays Day and number se...

26 „ Con fi rming a reservation The reservation can be con fi rmed. • Setting Displays Normal display Con fi rmation display Press 1. . The day of the week and the reservation number of current day will be displayed. • Press 2. to select the day of the week and the reservation number to be con fi rm...

27 WEEKLY TIMER Operation „ To delete reservations The individual reservation Press 1. . The day of the week and the reservation number will be displayed. • Press 2. to select the day of the week and the reservation number to be deleted. Press 3. . “ • ” and “ ” or “ ” blink. Press 4. and select “ b...

28 Note for Multi System Multi system has one outdoor unit connected to multiple indoor units. Selecting the operation mode „ With the priority room setting present but inactive or not present. When more than one indoor unit is operating, priority is given tothe fi rst unit that was turned on. In th...

29 Note for Multi System COOL / HEAT mode lock „ The COOL / HEAT mode lock requires initial programming during installation. Please consult your authorized dealer forassistance. The COOL / HEAT mode lock sets the unit forcibly to either COOL or HEAT mode. This function is convenient when you wish to...

Panel tab 30 Care and Cleaning Quick reference „ How to open / close the front panel Hold the front panel by the panel tabs on the 2 sides and open it. • Press the front panel at both sides and the center to close it. • Cleaning parts Notes on cleaning „ For cleaning, do not use the materials as fol...

31 Care and Cleaning CAUTION When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully. • When removing or attaching the front panel, support the panel securely with hand to prevent it from falling. • After cleaning, make sure that the front panel is se...

32 CAUTION Do not touch the aluminum fi ns by bare hand at the time of dismounting or mounting the fi lter. • Pull out the air fi lters. 1. Open the front panel. • Push a little upwards the fi lter tab at the center of • each air fi lter, then pull it down. 1) Push 2) Pull down Wash the air fi lters...

33 Care and Cleaning Take off the titanium 1. apatite photocatalytic air-purifying fi lter. Open the front panel and pull out the air fi lters. • Hold the recessed parts of the frame and unhook • the 4 claws. Claw Claw Clean or replace the titanium 2. apatite photocatalytic air-purifying fi lter. [M...

35 Troubleshooting These cases are not troubles. „ The following cases are not air conditioner troubles but have some reasons. You may just continue using it. • Indoor unit The fl aps do not start swing immediately. The air conditioner is adjusting the fl ap position. The • fl ap will start moving s...

36 Troubleshooting measures are classi fi ed into the following two types on a remedial basis. • Take an appropriate measure according to the symptom. Not trouble These cases are not troubles. • Check Please check again before calling a repair person. • The air conditioner does not operate. (OPERATI...

38 Call the service shop immediately „ WARNING When an abnormality (such as a burning smell) occurs, stop operation and turn the breaker off. „ Continued operation in an abnormal condition may result in troubles, electric shocks or fi re. • Consult the service shop where you bought the air condition...

3P266960-1 M09B394 (1008) HT Two-dimensional bar code is a code for manufacturing. Quick Reference 00_CV_3P266960-1.indd 2 00_CV_3P266960-1.indd 2 4/9/2010 5:07:32 PM 4/9/2010 5:07:32 PM