ClearSounds SW200 - Manual

6 – ENGLISH 11. Lamp Outlet 12. Telphone Line IN/OUT jacks 13. Vibrating Pad Jacks 14. Telephone Ring Signaling Tone Selection 15. LCD Contrast Selection (HI-LO) 16. Speaker (Sound Ring Tone) 14 15 16 11 12 13

7 – ENGLISH █ KEY DESCRIPTIONS Lamp Key Turns the connected lamp On/Off LED Flash/Up Key 1. Activates/deactivates the LED Flash function 2. Use as the Up key when setting the time or alarm Shaker/Return Key 1. Activates/deactivates the Shaker (Shake A and Shake B) function (requires vibrating pad) 2...

8 – ENGLISH Installation of your ClearSounds® SW200 Shake Up Wake Up Dual Alarm Clock is easy. If at any time you have questions about your clock after reading this manual, please contact the ClearSounds® Customer Service Department at 1-800-965-9043. █ PARTS CHECKLIST Check the contents of the box ...

9 – ENGLISH █ LCD CONTRAST SETTING To adjust the brightness of the display, simply move the Dimmer Control located on the back of your clock to HI or LO. █ CONNECTING A LAMP You are able to connect a lamp to the clock and use the lamp for room lighting and/or alarm clock notification. 1. Connect the...

10 – ENGLISH LED/optional Lamp Flashing Press and hold the LED Flash key to activate the LED flasher function. If you have plugged a lamp into the clock, it will also flash when the alarm goes off. Vibrating Pad Jacks You can connect a vibrating pad to each of the vibrating pad jacks on the back of ...

12 – ENGLISH █ SET THE TIME If your clock is connected to the phone line and you subscribe to Caller ID service, the time will be automatically set when you receive a call. You can also select a 12 or 24 hour mode. Please make sure to set the correct AM/PM time. A round light in the upper right of t...

13 – ENGLISH █ SET THE ALARM AND SOUND, VISUAL AND SHAKER NOTIFICATION This clock offers 2 separate alarms that can be set for different times. Alarm 1 is displayed as 1 and Alarm 2 is displayed as 2 . When either alarm is switched On , the blue backlighting will appear on the Set Alarm key. The sno...

15 – ENGLISH █ TELEPHONE RING SIGNALER If you choose to connect the Shake Up Wake Up to your telephone line, it will notify you when there is an incoming phone call. The sound ring selection is controlled by a separate switch located on the back of the clock. You must activate the Sound Alarm key to...

16 – ENGLISH TECHNICAL SPECIFICATIONS General Number: SW200 Amplification: Up to 87 dB Features and Specifications subject to change without notice. To learn more, call ClearSounds at 1-800-965-9043 or visit www.clearsounds.com FCC WANTS YOU TO KNOW 1. This equipment complies with Part 68 of the FCC...

17 – ENGLISH 6. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. 7. If the telephone company requests information on what equipment is connected to their lines, inform them ...

18 – ENGLISH INDUSTRY CANADA CS03 STATEMENT This product meets the applicable Industry Canada technical specification. This is confirmed by the registration number. The abbreviation, IC before the registration number signifies that registration was performed based on a Declaration of Conformity indi...

19 – ENGLISH LIMITED ONE-YEAR WARRANTY The product is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use for one (1) year from the date of purchase. Should you experience a problem, contact our customer service department or visit our website at www.cl...

20 – ENGLISH shipping the product to us. Any shipment without a (RMA) Return Merchandise Authorization number will not be accepted and will be returned to you at your expense. All authorized returned products must be accompanied with proof of purchase and a brief explanation of the problem. For out ...