ClearSounds CSC1000 - Manual

6 – ENGLISH WARNING: Never push any object through the slots in the telephone. They can touch dangerous voltage points or short out parts that could results in risk of fire or electrical shock. WARNING: Do not cover slots and opening on the units, they are needed for ventilation and protection again...

7 – ENGLISH █ LOCATION OF CONTROLS Diagram 1 01. Hook Switch 16. Headset Key 02. Handset Hanger Tab 17. Message waiting / 03. Large LCD/Caller ID Screen New call LED 04. Left Soft Key 18. In Use LED Indicator 05. Right Soft Key 19. Visual Phone Ringer 06. Up/Down Scroll 20. Microphone 07. Handset To...

8 – ENGLISH LOCATION OF CONTROLS (continued) BACK SIDE LEFT SIDE RIGHT SIDE 34 35 36 37 38 39 29 30 31 32 33 LEFT SIDE 34. Audio (3.5mm) Headset/ Neckloop Jack 35. Telephone (2.5mm) Headset / Neckloop Jack 36. Handset Cord Jack RIGHT SIDE 37. ON/OFF New Call/Voice Mail Indicator Switch 38. Speakerph...

9 – ENGLISH BACK SIDE 29. Port for (optional) ClearSounds Bed Shaker 30. RINGER - Strobe & Shaker / Only Shaker / Only Strobe 31. Amplification Reset Override Switch (ON/OFF) 32. AC Power Adapter Jack 33. Phone Line Cord Jack UNDERSIDE 39. Memory Card 40. Back Light ON/OFF Switch 41. Wall Mount ...

10 – ENGLISH (21) Make/Answer/End a call Activates the speakerphone if pressed during a call, as described on page 18 (22) Last number redial, as described on page 27 or insert a pause when pre-dialing a number (6) Up or Down or scroll for menu options. Enter the CID book, as described on page 36 So...

11 – ENGLISH █ INSTALLATION STEPS Installation of your ClearSounds® CSC1000 Amplified Freedom Phone™ with Full ClearDigital™ Power is easy. There are some basic steps you need to take when you set-up your phone for the first time. 1. Check parts list 2. Pre-select auxiliary features: a. AMPLIFICATIO...

13 – ENGLISH 1. Slide the handset hanger tab out and reverse its position (rotate it 180 degrees). Slide it back into place so that the hook points up (see Diagram 6) . This will keep the handset from falling out of the cradle when it is mounted on the wall. 2. Plug the AC power adapter into the jac...

14 – ENGLISH 6. Holding the phone slightly above the mounting screws on the wall jack, push the phone against the mounting screws so they are hooked into upper and lower keyhole slots on the back of the phone. Slowly slide the phone down until it snaps into place (see Diagram 8) . 7. When mounting t...

16 – ENGLISH █ Ringer Setting You can adjust the ringer of your phone as high as +95 dB. There are 2 methods to set this feature. Method 1 (Volume Only) : By adjusting volume on the right side of the phone In standby mode, you can adjust the ringer volume by using the Volume Control V- or V+ on the ...

19 – ENGLISH 2. Adjust your volume by using the volume control V- or V+ located on right side of the phone. 3. To end the call, press the Speaker key again on the base. Using a Headset or Neckloop (see page 20) █ Making a Call Using the Handset 1. To make a call, lift the handset and listen for a di...

22 – ENGLISH █ MENU To Access a MENU Option 1. To display the menu list, press the Menu soft key. 2. To scroll through menu options, press ▲ or ▼ repeatedly. 3. To select a menu item, Press the Select soft key when the desired menu item appears on the display. 4. Repeat if necessary. To Exit from an...

28 – ENGLISH Dialing from the Redial List 1. Press the Redial key in standby mode. 2. Press ▲ or ▼ repeatedly until you find the number you want to dial. If you have the Talking Review Mode set to ON, the number for each record will be announced as you scroll through the Redial list. 3. Pick up the ...

30 – ENGLISH Use this feature to customize the display settings according to your needs. █ LCD Contrast Settings 1. Press the Menu soft key to display the main menu list. 2. Press the Select soft key to access Set Display . 3. Press ▼ to move to Set Contrast and then press the Select soft key. 4. Pr...

32 – ENGLISH Setting Time, Date and Day of the Week 1. Press the Menu soft key to display the main menu list. 2. Press ▼ to move to Date and Time and then press the Select soft key. 3. Enter the current time using the numeric keypad and use the ▲ to select AM/PM and then press the Save soft key. 4. ...

33 – ENGLISH If you forget to connect the phone line cord, “ No line ” will show on the screen. When you press the Menu soft key, the display will show the main menu. Use the ▲ or ▼ key to scroll through the menu and select the desired one and then press the Select soft key to confirm. When a new ca...

34 – ENGLISH When a voice mail message is left, the screen will display “New voice mail” and the message will be saved as a call. If you have new messages, you will hear a stutter dial tone when you pick up the handset. The CSC1000 has a message indicator light, which will blink when you have new me...

35 – ENGLISH █ Storing CID Records Your telephone’s Caller ID memory stores the data for the 30 most recent calls received. When the 31 st call is received, the oldest Caller ID record (1 st call) is automatically deleted. You may review the stored information at any time. Calls received since your ...

36 – ENGLISH █ Caller ID on Call Waiting When you subscribe to Call Waiting Caller ID service from your local telephone provider, the telephone will display the Caller ID information of the second call while you are on the first call. 1. When you are on existing call, a tone will emit, and the Calle...

38 – ENGLISH and end the recording. Your recording will immediately play back for your confirmation. Number Stored will appear. 5. To exit, press the Exit soft key once to return to the main screen. Otherwise, after 1 minute, the display will automatically return to the main screen. The answering ma...

39 – ENGLISH To Turn the Answering Machine ON/OFF 1. Press the Menu soft key to display the main menu list. 2. Press ▲ or ▼ to move to TAM setup and then press the Select soft key. 3. Press the Select soft key to choose TAM ON/OFF . 4. Press ▲ or ▼ to ON or OFF and then press the Save soft key. 5. T...

42 – ENGLISH and held during the whole process. 2. Release the MEMO key to end the recording. Screening Calls 1. When the answering machine answers the call, listen while the caller leaves a message. 2. To speak to the caller, pick up the handset or press the Speaker key. The answering machine autom...

45 – ENGLISH 1. Dial your telephone number from any touch tone telephone. 2. When the outgoing message starts to play, you may enter the remote access mode by inputting the security ID. 3. After you enter the security ID, the system will play the menu of commands. You can then follow the commands to...

46 – ENGLISH Character Map To enter a specific alphanumeric character, press the relevant key one or more times for the required character according to the following table: once for the first character, twice for the second and so on. Clarification: • If you want to shift the case between upper and ...

47 – ENGLISH 4. The display shows “ Record Voice ”. Press the Yes soft key to confirm or the No soft key to cancel. If you press Yes , you can start to record the name of this entry (up to 6 seconds). You can also press the End soft key to confirm and end the recording. Your recording will immediate...

49 – ENGLISH • Edit : allows you to edit the selected entry. • Erase: allows you to delete the selected entry. Note: After editing the name, you need to press the ▼ to edit the number. █ VIP Setting This feature allows you to assign one specific melody to everyone in your phonebook. You may choose f...

50 – ENGLISH TROUBLESHOOTING No dial tone 1. Check that all phone cord connections (including the curly cord) and AC adapter are security plugged into the telephone and wall jack. 2. Check that the phone is in the correct dialing mode: tone or pulse (page 23). 3. Plug another phone into the wall jac...

52 – ENGLISH TECHNICAL SPECIFICATIONS General Number: CSC1000 Amplification: Up to 55 dB incoming Power Requirements AC power Adapter: Input: 120~240VAC 50/60Hz 150mA Output: 7.5VDC 500mA Jacks: 3.5mm audio output 2.5mm headset 3.5mm shaker Features and Specifications subject to change without notic...

53 – ENGLISH FCC WANTS YOU TO KNOW 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier of [US: CLSTE12BCSC1000 ]. If requested, this number must be p...

54 – ENGLISH most areas, the sum of the RENs of all devices on any one line should not exceed five (5.0). If too many devices are attached, they may not ring properly. Service Requirements In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. I...

56 – ENGLISH LIMITED ONE-YEAR WARRANTY The product is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use for one (1) year from the date of purchase. Should you experience a problem, contact our customer service department or visit our website at www.cl...

60 – ENGLISH Service in United States and Canada, contact: ClearSounds Communications Attention: Repair Center 1743 Quincy Avenue, Suite 155 Naperville, IL 60540 USA 800-965-9043 Check our website www.clearsounds.com for additional information and to download additional manuals and information.