CleanMax ZM-700 - User Manual

4 Description of the Vacuum 1 Ergonomic Handle 2 On/Off Power Switch, Two Speed 3 Bag Compartment 4 Vacuum Nozzle 5 Furniture Guard 6 Brushroll Jam Indicator (Model ZM-700) 7 Circuit Breaker Reset Button 8 Handle Release Pedal 9 Quick Release Cord Hook 10 Upper Cord Hook 11 Cord Restraint 4 3 1 2 5 ...

5 Assembling the Vacuum Attaching the Handle to the Vacuum NOTE: Do not plug in the vacuum until it is completely assembled.The vacuum cleaner and the handle are packed separately and require assembly. • Thread the cord through the lower and upper cord guides on the back of the vacuum bag (Fig. 1). ...

6 Assembling the Vacuum Attaching the Extension Power Cord to the Cord Lock • Connect the extension power cord to the pigtail cord on the vacuum. • Snap the extension power cord into the slot on the end of the cord lock. • Turn the knob on the bottom of the cord lock to tighten the lock and prevent ...

7 Operation Reclining the Handle • Press the handle release pedal located on the back of the vacuum with your foot to recline the handle (Fig. 1). On/Off Switch, Two Speed • The power switch located on the vacuum handle, is a three-way switch (Fig. 2). The middle position is the “Off” setting, the r...

8 Fig. 2 Power Cord Care • If the cord or plug has any apparent damage, refrain from using the vacuum. Please visit an Authorized CleanMax Distributor for a new cord or plug. • When the vacuum is in use, hold the cord to keep from running over it. • Avoid obstructions and do not pull the cord around...

9 Replacing the Vacuum Bag NOTE: Unplug the vacuum cleaner from the electrical outlet before changing the bag. • Unzip the bag compartment. • Remove the used vacuum bag by pulling the green bag collar tab away from the vacuum (Fig. 1). Slide the used bag out of the bag holder which automatically sea...

10 Maintenance and Care MATERIAL DRAWN ISSUED SCALE FINISH DATE DATE DO NOT SCALE UNLESS OTHERWISE SPECIFIED DESCRIPTION DRAWING SIZE:D PART NUMBER SHEET 1 OF 1 X.X ± .02 IN RADII X.X ± .02 X.XX ± .01 IN X,XX ± .01 X.XXX ± .005 IN MACHINE SURFACE X.XXXX ± .0005 IN BREAK SHARP CORNERS TO .010 MAX ± 0...

11 Fig. 1 Fig. 2 Maintenance and Care Replacing the Agitator Belt (Model ZM-500) WARNING! To reduce the risk of electrical shock or injury from moving parts, unplug before servicing or cleaning. NOTE: To ensure maximum cleaning efficiency, the belt should be checked regularly to be sure it is in goo...

12 Brushroll Jam Indicator (Model ZM-700) If an object, such as a throw rug or article of clothing, is ever picked up into your vacuum, the vacuum will sense this “jammed brushroll” condition and turn off the brushroll. When this happens, the Brushroll Jam Indicator light on the top of the nozzle wi...

13 Resetting the Circuit Breaker WARNING! To reduce the risk of electrical shock or injury from moving parts, unplug before servicing or cleaning. Your vacuum features a circuit breaker to protect the machine against damage due to a surge in the electrical current. Electrical surging can be a result...

15 Warranty What is Covered: This warranty covers any defects in material and workmanship in your new CleanMax vacuum. How Long Coverage Lasts: Warranty coverage for your CleanMax vacuum lasts one year. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accide...

16 OWNER’S WARRANTY INFORMATION Date of purchase Serial number Model number Purchased from: Store name Address City, State, Zip Telephone Register your new vacuum today at CleanMaxVacuums.com keep this for your records…

CleanMax Vacuum Cleaners PO Box 730 Fenton, MO 63026 B503-3600D