Cisco XR 12000 SIP-601 - Manual
Cisco XR 12000 SIP-601 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Prerequisites for Configuring Serial Interfaces; Information About Serial Interfaces
- Page 5 – Default Settings for Serial Interface Configurations
- Page 6 – Cisco IOS XR PPP Encapsulation; Cisco IOS XR HDLC Encapsulation
- Page 7 – How to Configure Serial Interfaces; SUMMARY STEPS
- Page 8 – DETAILED STEPS
- Page 10 – Configuration Examples for Serial Interfaces; Additional References; Related Documents
- Page 11 – Standards
HC-115
Cisco IOS XR Interface and Hardware Component Configuration Guide
Configuring Serial Interfaces on Cisco IOS XR
Software
This module describes the serial interfaces on routers supporting Cisco IOS XR software. Before you
configure a serial interface, you must configure the clear channel T3/E3 controller or channelized
T1/E1controller (DS0 channel) that is associated with that interface.
Feature History for Configuring Serial Controller Interfaces
Contents
•
Prerequisites for Configuring Serial Interfaces, page HC-116
•
Information About Serial Interfaces, page HC-116
•
How to Configure Serial Interfaces, page HC-121
•
Additional References, page HC-124
Release
Modification
Release 3.3.0
This feature was introduced on the Cisco XR 12000 Series Router.
Support was added on the Cisco XR 12000 Series Router for the following
hardware:
•
Cisco XR 12000 SIP-401
•
Cisco XR 12000 SIP-501
•
Cisco XR 12000 SIP-601
Support was added on the Cisco XR 12000 Series Router for the following
SPAs:
•
2-Port and 4-Port Channelized T3 Serial SPA
•
2-Port and 4-Port T3/E3 Serial SPA
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Configuring Serial Interfaces on Cisco IOS XR Software Prerequisites for Configuring Serial Interfaces HC-116 Cisco IOS XR Interface and Hardware Component Configuration Guide Prerequisites for Configuring Serial Interfaces Before configuring serial interfaces, be sure that the following tasks and c...
Configuring Serial Interfaces on Cisco IOS XR Software Information About Serial Interfaces HC-119 Cisco IOS XR Interface and Hardware Component Configuration Guide Default Settings for Serial Interface Configurations When an interface is enabled on a T3/E3 SPA, and no additional configuration comman...
Configuring Serial Interfaces on Cisco IOS XR Software Information About Serial Interfaces HC-120 Cisco IOS XR Interface and Hardware Component Configuration Guide • t1-num: T1 or E1 channel number. T1 channels range from 0 to 23; E1 channels range from 0 to 30. • channel-group-number: Time slot num...
