Cisco WS-F6K-MSFC2 - Manual
Cisco WS-F6K-MSFC2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Overview
- Page 4 – Features
- Page 6 – Software Requirements
- Page 7 – Installation Guidelines; Preparing the Supervisor Engine
- Page 8 – Removing the MSFC from the Supervisor Engine 1A
- Page 10 – Installing the MSFC2
- Page 14 – Related Documentation; World Wide Web
- Page 15 – Ordering Documentation; Obtaining Technical Assistance
- Page 16 – Technical Assistance Center; Cisco TAC Web Site
- Page 17 – Cisco TAC Escalation Center
Corporate Headquarters:
Copyright © 2000–2001. Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Catalyst 6000 Family Multilayer Switch
Feature Card 2 Installation Note
Product number: WS-F6K-MSFC2=
This publication describes how to install the Catalyst 6000 Family Multilayer Switch Feature Card 2
(MSFC2) on a Supervisor Engine 1A or Supervisor Engine 2.
Contents
This publication contains these sections:
•
•
•
•
•
•
Installation Guidelines, page 7
•
Preparing the Supervisor Engine, page 7
•
Removing the MSFC from the Supervisor Engine 1A, page 8
•
•
Related Documentation, page 14
•
Obtaining Documentation, page 14
•
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note 78-10605-03 Safety Overview Safety Overview Safety warnings appear throughout this publication in procedures that may harm you if performed incorrectly. A warning symbol precedes each warning statement. Warning This warning sy...
4 Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note 78-10605-03 Features Features The MSFC2 ships with 128-MB SDRAM at 100 MHz with Error Checking and Correction ( ECC) (single-bit error detection and correction; 2-bit error detection) as the default and is upgradeable to 256 M...
6 Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note 78-10605-03 Software Requirements Software Requirements The software requirements are as follows: • For switches with Cisco IOS on the Catalyst 6000 Family of Switches product on both the supervisor engine and the MSFC2: Cisco...
