Cisco OSR-7609 - Manual
Cisco OSR-7609 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents; Safety Overview
- Page 3 – Parts List
- Page 4 – Installation Guidelines; Shutting Down the System
- Page 5 – Replacing the Panel Safety Cover
- Page 7 – Replacing the Fan Tray
- Page 8 – Removing the Fan Tray
- Page 9 – Installing the High Speed Fan Tray
- Page 10 – Replacing the Power Supply; Removing an AC-Input Power Supply
- Page 12 – Installing the 3000 W AC-Input Power Supply
- Page 13 – Connecting Power to the Fan Tray
- Page 14 – Installing the Fan Tray Power Cable for AC-Input Systems
- Page 15 – Connecting Site Power to the Fan Tray for DC-Input Systems
- Page 17 – Replacing the Supervisor Engine; Removing the Supervisor Engine
- Page 18 – Installing the Supervisor Engine
- Page 21 – Powering Up the System
- Page 22 – Verifying Installation
- Page 23 – Related Documentation; Obtaining Documentation; Product Documentation DVD
- Page 24 – Ordering Documentation; Documentation Feedback; Cisco Product Security Overview
- Page 25 – Reporting Security Problems in Cisco Products; Obtaining Technical Assistance
- Page 26 – Cisco Technical Support & Documentation Website; Submitting a Service Request
- Page 27 – Definitions of Service Request Severity; Obtaining Additional Publications and Information
Corporate Headquarters:
Copyright © 2004–2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Catalyst 6509-NEB Switch and Cisco OSR-7609
Router Upgrade Note
Product Number: WS-6509-NEB-UPGRD=
This publication describes how to upgrade your Catalyst 6509-NEB switch or Cisco OSR-7609 Router
to use the Supervisor Engine 720 and the Supervisor Engine 32.
Note
AC-Input Systems—If your switch or router is using an AC-input power supply, you are required to
install the WS-CAC-3000W power supply. The 3000 W AC-input provides a power output to power the
fan tray.
Note
DC-Input Systems—If your switch or router is using a DC-input power supply, you are required to
install the WS-CDC-2500W or PWR-4000-DC power supply. You must provide a separate, direct
connection to power the fan tray. Each input of the fan tray is rated 10 A @ -40 to -60 VDC.
Caution
It is important that you follow the steps in this document in the order they are presented.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Catalyst 6509-NEB Switch and Cisco OSR-7609 Router Upgrade Note 78-16162-02 Contents Contents This publication consists of the following sections: • Safety Overview, page 2 • Parts List, page 3 • Required Tools, page 3 • Installation Guidelines, page 4 • Shutting Down the System, page 4 • Replacin...
3 Catalyst 6509-NEB Switch and Cisco OSR-7609 Router Upgrade Note 78-16162-02 Parts List Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028 Warning Only trained and qualified personnel should be allowed to insta...
4 Catalyst 6509-NEB Switch and Cisco OSR-7609 Router Upgrade Note 78-16162-02 Installation Guidelines Installation Guidelines Follow these guidelines when upgrading the chassis: • If your switch or router is using an AC-input power supply, you are required to install the WS-CAC-3000W power supply. T...
