Cisco OL-7469-04 - Manual
Cisco OL-7469-04 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – General Problem Solving; Troubleshooting the Power and Cooling Systems
- Page 3 – Environmental Monitoring; Troubleshooting Modules
- Page 4 – MWAM Problem Solving; Module Seating; Verify the installation; STATUS LED
- Page 5 – Determining the MWAM Cisco IOS Image Name; Verifying the MWAM Configuration; DIMM Issue
- Page 6 – Maximum Buffer Allocation for Complex 0 CPUs; MWAM System Error Messages; Processor Complex Resetting
- Page 7 – Flash Error Messages
- Page 8 – NVRAM Error Messages; FUR Error Messages
- Page 9 – System Error Messages
B-1
Multiprocessor WAN Application Module User Guide
OL-7469-04
A P P E N D I X
B
Troubleshooting
During power up, your Cisco Catalyst 6500 Series switch or Cisco 7600 Series Internet Router goes
through a system check. This system check also includes all the modules (for example, the MWAM) that
are installed.
If your MWAM is not powering up properly, begin troubleshooting using the procedures in this
appendix. This appendix guides you through some initial checks and procedures that can solve some
basic MWAM problems. It can also direct you to the appropriate document for detailed troubleshooting
information and procedures to solve more complex problems.
This appendix contains general problem solving information about your Catalyst 6500 switch or Cisco
7600 router and specific problem solving information about your MWAM module in the following
sections:
•
General Problem Solving, page B-2
•
MWAM Problem Solving, page B-4
•
MWAM System Error Messages, page B-6
Tip
If you cannot locate the source of the problem, contact a customer service representative for information
on how to proceed. For technical support information, see the Cisco Information Packet publication that
shipped with your product. Before you call, have the following information ready:
•
Chassis type and serial number
•
Maintenance agreement or warranty information
•
Type of software and version number
•
Date you received the new chassis
•
Brief description of the problem
•
Brief explanation of the steps you have taken to isolate the problem
For specific troubleshooting details about the Catalyst 6500 switch or Cisco 7600 router, refer to the
Troubleshooting
chapters in the following books:
•
Catalyst 6500 Series Switch Installation Guide—Appendix E
•
Cisco 7600 Series Router Installation Guide—Chapter 4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
B-2 Multiprocessor WAN Application Module User Guide OL-7469-04 Appendix B Troubleshooting General Problem Solving General Problem Solving As you start your problem solving, you first look at the way your Catalyst 6500 switch or Cisco 7600 router is responding during power up. The key to problem sol...
B-3 Multiprocessor WAN Application Module User Guide OL-7469-04 Appendix B Troubleshooting General Problem Solving Environmental Monitoring The Catalyst 6500 switch and the Cisco 7600 router both provide environmental monitoring of their chassis components for over temperature conditions. This envir...
B-4 Multiprocessor WAN Application Module User Guide OL-7469-04 Appendix B Troubleshooting MWAM Problem Solving MWAM Problem Solving In a typical MWAM problem solving situation, you would first check the following: • The module is firmly seated in its slot. • The installation is verified. • The STAT...
