Cisco OL-20852-01 - Manual
Cisco OL-20852-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Adding a User to Cisco Unified Communications Manager; Adding a User From an External LDAP Directory; Adding a User Directly to Cisco Unified Communications Manager
- Page 3 – Configuring the Phone
- Page 6 – Performing Final End User Configuration Steps
D-1
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
OL-20852-01
A P P E N D I X
D
Basic Phone Administration Steps
This appendix provides minimum, basic configuration steps for you to do the following:
•
Add a new user to Cisco Unified Communications Manager Administration
•
Configure a new phone for that user
•
Associate that user to that phone
•
Complete other basic end-user configuration tasks
The procedures provide one method for performing these tasks and are not the only way to perform these
tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.
These procedures are designed to be used on a mature Cisco Unified Communications Manager system
where calling search spaces, partitions, and other complicated configuration have already been done and
are in place for existing users.
This section contains these topics:
•
Example User Information for These Procedures, page D-1
•
Adding a User to Cisco Unified Communications Manager, page D-2
•
Configuring the Phone, page D-3
•
Performing Final End User Configuration Steps, page D-6
Example User Information for These Procedures
In the procedures that follow, examples are given when possible to illustrate some of the steps. Sample
user and phone information used throughout these procedures includes:
•
User’s Name: John Doe
•
User ID: johndoe
•
Phone model: 6901
•
Protocol: SCCP
•
MAC address listed on phone: 00127F576611
•
Five-digit internal telephone number: 26640
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
D-2 Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP) OL-20852-01 Appendix D Basic Phone Administration Steps Adding a User to Cisco Unified Communications Manager Adding a User to Cisco Unified Communications Manager This section describes...
D-3 Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP) OL-20852-01 Appendix D Basic Phone Administration Steps Configuring the Phone – User ID—Enter the end user identification name. Cisco Unified Communications Manager does not permit modif...
D-6 Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP) OL-20852-01 Appendix D Basic Phone Administration Steps Performing Final End User Configuration Steps g. Click Save . h. Click Associate End Users at the bottom of the window to associat...
