Cisco OL-10663-02 - Manual
Cisco OL-10663-02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Restrictions for Presence Service; dn; number; Information About Presence Service; Presence Service
- Page 3 – How to Configure Presence Service
- Page 4 – Enabling Presence for Internal Lines; Restrictions; SUMMARY STEPS; DETAILED STEPS; Command or Action
- Page 5 – Enabling a Directory Number to be Watched; allow watch
- Page 7 – Prerequisites
- Page 8 – label
- Page 9 – What to Do Next; restart
- Page 11 – Configuring Presence to Watch External Lines
- Page 12 – authenticate
- Page 13 – Verifying Presence Configuration
- Page 14 – Troubleshooting Presence
- Page 16 – Configuration Examples for Presence; Presence in Cisco Unified CME: Example
- Page 19 – Additional References; Related Documents; Related Topic
- Page 20 – Technical Assistance; Description
- Page 21 – Feature Name
885
Cisco Unified Communications Manager Express System Administrator Guide
OL-10663-02
Configuring Presence Service
Last Updated: November 26, 2007
This module describes presence support in a Cisco Unified Communications Manager Express
(Cisco Unified CME) system.
Finding Feature Information in This Module
Your Cisco Unified CME version may not support all of the features documented in this module. For a
list of the versions in which each feature is supported, see the
“Feature Information for Presence Service”
.
Contents
•
Prerequisites for Presence Service, page 885
•
Restrictions for Presence Service, page 886
•
Information About Presence Service, page 886
•
How to Configure Presence Service, page 887
•
Configuration Examples for Presence, page 900
•
Additional References, page 903
•
Feature Information for Presence Service, page 905
Prerequisites for Presence Service
•
Cisco Unified CME 4.1 or a later version.
•
Cisco Unified IP Phones 7911G, 7941G, 7941GE, 7961G, 7961GE, 7970G, and 7971GE require
firmware load 8.2(1) or a later version.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Configuring Presence Service Restrictions for Presence Service 886 Cisco Unified Communications Manager Express System Administrator Guide OL-10663-02 Restrictions for Presence Service • Presence features such as Busy Lamp Field (BLF) notification are supported for SIP trunks only; these features ar...
Configuring Presence Service How to Configure Presence Service 887 Cisco Unified Communications Manager Express System Administrator Guide OL-10663-02 Figure 53 BLF Notification Using Presence The following line states display through BLF indicators on the phone: • Line is idle—Displays when this li...
Configuring Presence Service How to Configure Presence Service 888 Cisco Unified Communications Manager Express System Administrator Guide OL-10663-02 • Verifying Presence Configuration, page 897 • Troubleshooting Presence, page 898 Enabling Presence for Internal Lines Perform the following steps to...
