Cisco MWR 1941-DC - Manual
Cisco MWR 1941-DC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Warnings
- Page 3 – Router Placement
- Page 4 – Required Tools and Equipment; Rack Mounting the Chassis
- Page 5 – Attaching the Brackets; Installing the Router in the Rack
- Page 6 – Translated Safety Warnings; Chassis Warning—Rack-Mounting and Servicing
- Page 9 – Obtaining Documentation; World Wide Web
- Page 10 – Ordering Documentation; Documentation Feedback; Obtaining Technical Assistance
- Page 11 – Technical Assistance Center; Contacting TAC by Using the Cisco TAC Website
- Page 12 – Contacting TAC by Telephone
Corporate Headquarters:
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco MWR 1941-DC Mobile Wireless Edge
Router Rack Mounting Instructions
This document describes how to rack mount the Cisco MWR 1941-DC router and contains the following
sections:
•
•
•
•
•
•
Obtaining Technical Assistance
Safety Recommendations
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
•
Wear safety glasses when working under any conditions that might be hazardous to your eyes.
•
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Cisco MWR 1941-DC Mobile Wireless Edge Router Rack Mounting Instructions 78-15841-02 Safety Warnings Safety warnings appear throughout this publication in procedures that, if performed incorrectly, may harm you. A warning symbol precedes each safety warning. Warning This warning symbol means dange...
3 Cisco MWR 1941-DC Mobile Wireless Edge Router Rack Mounting Instructions 78-15841-02 Router Placement You can mount the Cisco MWR 1941-DC router in a 19-inch rack that conforms to EIA-310-D specification (the inside width of the rack should be 17.72 to 17.80 inches per the EIA-310-D specification)...
4 Cisco MWR 1941-DC Mobile Wireless Edge Router Rack Mounting Instructions 78-15841-02 Required Tools and Equipment In addition to the rack-mounting brackets, you need the following tools and equipment to rack-mount the router: • Number 2 Phillips screwdriver • Screws to fit your rack Rack Mounting ...
