Cisco MPC-273 - Manual
Cisco MPC-273 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Prerequisites for Configuring MPLS VPNs over IP Tunnels; Restrictions for Configuring MPLS VPNs over IP Tunnels; Overview: MPLS VPNs over IP Tunnels
- Page 3 – SAFI; PE Routers and Address Space
- Page 4 – Packet Validation Mechanism; BGP Multipath Load Sharing for MPLS VPNs over IP Tunnels
- Page 5 – Inter-AS and CSC Support over IP Tunnels; How to Configure MPLS VPNs over IP Tunnels; Configuring the Global VRF Definition; SUMMARY STEPS
- Page 6 – DETAILED STEPS
- Page 7 – Configuring a Route-Policy Definition
- Page 8 – Configuring a Static Route
- Page 9 – Configuring an IPv4 Loopback Interface
- Page 11 – Configuring a CFI VRF Interface
- Page 12 – Configuring the Core Network
- Page 13 – Configuring Inter-AS and CSC support over IP Tunnels
- Page 16 – Configuring the Backbone Carrier Core for IP Tunnels
- Page 20 – Verifying MPLS VPN over IP
- Page 21 – Configuration Examples for MPLS VPNs over IP Tunnels; Configuring an L2TPv3 Tunnel: Example; Configuring the Global VRF Definition: Example; Configuring a Route-Policy Definition: Example
- Page 22 – Configuring a Static Route: Example; Configuring an IPv4 Loopback Interface: Example; Configuring a CFI VRF Interface: Example; Additional References; Related Documents
- Page 23 – Standards
- Page 24 – Technical Assistance
MPC-273
Cisco IOS XR MPLS Configuration Guide
OL-12284-01
Implementing MPLS VPNs over IP Tunnels on
Cisco IOS XR Software
The MPLS VPNs over IP Tunnels feature lets you deploy Layer 3 Virtual Private Network (L3VPN)
services, over an IP core network, using L2TPv3 multipoint tunneling instead of MPLS. This allows
L2TPv3 tunnels to be configured as multipoint tunnels to transport IP VPN services across the core
IP network.
Note
This feature is available on the Cisco XR 12000 Series Router only.
Feature History for Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR
Contents
•
Prerequisites for Configuring MPLS VPNs over IP Tunnels, page MPC-274
•
Restrictions for Configuring MPLS VPNs over IP Tunnels, page MPC-274
•
Information About MPLS VPNs over IP Tunnels, page MPC-274
•
How to Configure MPLS VPNs over IP Tunnels, page MPC-277
•
Configuration Examples for MPLS VPNs over IP Tunnels, page MPC-293
•
Additional References, page MPC-294
Release
Modification
Release 3.5.0
This feature was introduced on the Cisco XR 12000 Series Router
.
Release 3.6.0
No modification.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software Prerequisites for Configuring MPLS VPNs over IP Tunnels MPC-274 Cisco IOS XR MPLS Configuration Guide OL-12284-01 Prerequisites for Configuring MPLS VPNs over IP Tunnels The following prerequisites are required to implement MPLS VPNs ov...
Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software Information About MPLS VPNs over IP Tunnels MPC-275 Cisco IOS XR MPLS Configuration Guide OL-12284-01 Figure 24 Basic MPLS VPN over IP Topology Advertising Tunnel Type and Tunnel Capabilities Between PE Routers—BGP Border Gateway Protoc...
Implementing MPLS VPNs over IP Tunnels on Cisco IOS XR Software Information About MPLS VPNs over IP Tunnels MPC-276 Cisco IOS XR MPLS Configuration Guide OL-12284-01 Packet Validation Mechanism The MPLS VPNs over IP Tunnels feature provides a simple mechanism to validate received packets from approp...
