Cisco EIA/TIA-232 - Manual
Cisco EIA/TIA-232 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DB-25 modem connector; Connecting to a VT-Series Terminal; Transmit; None; Stop bit; Off
- Page 3 – Connecting to an IBM PC or Compatible
- Page 4 – Connecting to a Modem
- Page 5 – Wiring and Signal Assignment Specifications
- Page 7 – Cisco Connection Online
- Page 8 – You can access CCO in the following ways:; Note
1
Doc. No.
Cisco Systems, Inc.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1996
Catalyst 1800 Token Ring Switch Cable Kit Guide
This guide provides configuration and connection instructions for the EIA/TIA-232 console/modem
cable and the adapters used when connecting a PC, a VT series terminal, or a modem to the Catalyst
1800 Token Ring switch to access out-of-band management via the EIA/TIA-232 DB-9 male console
port.
Note
EIA/TIA-232 was known as recommended standard RS-232 before its acceptance as a
standard by the Electronic Industries Association (EIA) and Telecommunications Industry
Association (TIA).
Cisco documentation and additional literature are available in a CD-ROM package. The
Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly.
Therefore, it might be more up to date than printed documentation. To order copies of the
Documentation CD-ROM, contact your local sales representative or call customer service. The
CD-ROM package is available as a single package or as an annual subscription. You can also access
Cisco documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
Management terminal and modem requirements are as follows:
•
VT 320/420-series terminal or VT-type terminal running emulation programs for the VT series
•
IBM or compatible PC running a VT-series emulation software package
•
Hayes-compatible modem
This guide also provides the following pin assignments:
•
DB-9 console port connector on the Catalyst 1800 chassis
•
DB-9 PC connector
78-3816-01 Rev. A0
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Catalyst 1800 Token Ring Switch Cable Kit Guide Connecting to a VT-Series Terminal • DB-25 VT-series connector • DB-25 modem connector The Catalyst 1800 console cable kit (part number 78-1188-01) includes • One 6-foot (1.8-meter) length of unshielded twisted pair (UTP) EIA/TIA-232 cable with RJ-45...
Catalyst 1800 Token Ring Switch Cable Kit Guide 3 Connecting to an IBM PC or Compatible Figure 1 Connecting a VT-Series Terminal to a Catalyst 1800 Switch Connecting to an IBM PC or Compatible Follow these steps to connect an IBM PC or compatible to a Catalyst 1800 switch (see Figure 2).Note that th...
4 Catalyst 1800 Token Ring Switch Cable Kit Guide Connecting to a Modem Figure 2 Connecting an IBM PC or Compatible to a Catalyst 1800 Switch Connecting to a Modem Follow these steps to connect an IBM PC or compatible to a Catalyst 1800 switch (see Figure 3).Note that the PC must be running a VT ter...
