Cisco DS Series - Manual
Cisco DS Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – DS71-MD4 Serial host and 56k Modem
- Page 4 – ABOUT THIS OWNER’S MANUAL; Standard for Information Technology; Connection Description
- Page 5 – EIA-232 SERIAL CONNECTION; not; shipped with unit but is available upon request at time of; Installation; UNPACKING; or call toll free inside the United States at
- Page 6 – Power; Serial Setup; Connect the
- Page 7 – Main Menu
- Page 8 – Login Setup; Figure 3
- Page 10 – Local Modem Option; This option sets the number of rings before the unit answers.; Cabling; RJ-45 Cables and Adapters; Pin EIA
- Page 11 – Adapters
- Page 13 – Detailed Operation and Configuration; Configuration Menu; without the option description:
- Page 14 – Configuration Status
- Page 16 – Serial Port Configuration; default settings; are; Baud Rate; Select “Word Size” and the DS displays the following:; Default is 8
- Page 18 – Select “RTS Driver State” the DS displays the following:; Port Device Name; Select a port and type the new name:; Port Select Code; and is; Attention Character; The Default is
- Page 19 – Disconnect Timeguard; The Default setting is Disabled.; Connect port ID Echo; The Default setting is Disabled
- Page 20 – Header; Default Header is enabled; Access Control; Default for both is disabled.; The host module confirms the option you selected to change.; Menu; The default user and password is; Manage Users; The “admin” can not be deleted.
- Page 22 – Auto Connect; Select 2) to turn on or off the Auto Connect feature
- Page 23 – Assign User Ports; This option allows the administrator to limit users’ port access.; Add ports; Remove Ports; Module displays the user’s assigned ports:; Add All Ports
- Page 24 – Ring to Answer; The default setting is 2; Connectivity Timeout; Default setting is 60 minutes.; The module displays the following:; Inactivity Timeout; Default setting is; Select Inactivity Timeout and the module display the following:
- Page 25 – Unit ID; This option allows the admin users to change the Host Module’s name.; Unit Reset; does not return user selections to their default settings.; Functional Solutions:; DS power is on and cable connected to EIA232 serial port.
- Page 27 – DS71-MD4 Reset Procedure; BayTech Product Warranty
- Page 28 – Exceptions; Technical Support; Repair and Return Policy
- Page 29 – Return Authorization Process:
DS Series Manual
DATA SWITCH
DS71-MD4 Host-Modem Module
BayTech Manual Publication
Revision May 2008
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DS71-MD4 Serial host and 56k Modem 3 ABOUT THIS OWNER’S MANUAL .......................................................................................................... 4 Connection Description ............................................................................................................
DS71-MD4 Serial host and 56k Modem 4 ABOUT THIS OWNER’S MANUAL This document provides information required for installing and operating your Bay Tech equipment. It should allow the user to connect to, power up, and access an applications menu where peripheral equipment can be controlled. We recommen...
DS71-MD4 Serial host and 56k Modem 5 EIA-232 SERIAL CONNECTION The DS-Series host communications modules have an RJ-45 port which uses an 8-pin crossed modular cable to connect to a local EIA-232 device such as a computer terminal or external modem. Most serial computers do not have RJ-45 connection...
