Cisco CWM 9.2 - Manual
Cisco CWM 9.2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing the Cisco WAN Manager 9.2 Software; Remove the CWM 9.2 CD from the case and insert it into the CD-ROM drive.; Mounting the Locally Attached CD-ROM Drive; Note; Solaris on a Sun SPARC system, this mount step is not necessary.; Mounting a Remotely Attached CD-ROM Drive
- Page 3 – Exporting the CD-ROM Drive from a Remote SunOS Host; To Export the CD-ROM Drive From a Remote Solaris Host; Proceed to “Installing Cisco WAN Manager Manually”.
- Page 4 – Installing Cisco WAN Manager Manually; Solaris 2.6 operating system installed on your workstation; — CSCOconf - Configuration files; Installing Cisco WAN Manager; If you are not already logged in as user root, do so now.
- Page 5 – Installing CSCOconf; The CSCOconf package installation process is initiated:
- Page 6 – Running the install_config Program; The system prompts you as follows:; You must enter “m” and press Return to invoke an Manual Install.
- Page 7 – When asked to provide a password for user svplus, reply svplus.; Installing CSCOinf
- Page 8 – Installing CSCOsv (Cisco WAN Manager Software Package)
- Page 9 – Installing the Installation Script
- Page 10 – correct raw partition is specified here.
C H A P T E R
Manual Installation Procedures 3-1
3
Manual Installation Procedures
The chapter guides you through a manual installation of Cisco WAN Manager (SV+) and its
associated software programs.
Note
Prior to installing CWM 9.2, you must have Sun’s Solaris 2.6 and optionally, though strongly
recommended, Hewlett Packard’s OpenView 5.01 installed on your workstation. You may also need
to customize the set up of the raw partition size for Informix OnLine. For limited instructions on
installing the Solaris 2.6 and partitioning your disk for Informix OnLine, see Appendix A, as well
as the Sun Installation Guide. For instructions on installing HP OpenView, refer to the HP OpenView
Installation Guide.
When Solaris 2.6 and HP OpenView 5.01 are already installed on your machine and your disk is
partitioned to your satisfaction, you are ready to proceed to “Installing the Cisco WAN Manager 9.2
Software”.
When you plan to use the HP OpenView 5.01 and/or Wingz 2.5.1 applications in conjunction with
the CWM 9.2 product, you must install these applications prior to installing CWM 9.2.
When you plan to use the CiscoView 4.2 application in conjunction with the CWM 9.2 product, you
do not have to install CiscoView 4.2 prior to installing CWM 9.2.
Installing the Cisco WAN Manager 9.2 Software
You can install the CWM 9.2 software from either a locally attached or remote CD-ROM drive.
When you invoke the installation script from a remote drive, the remote and local platforms do not
have to be running the same operating system. Following is a list of the tasks you must perform to
load and mount the CD-ROM, install the CWM 9.2 and associated software, configure the various
product components, and start the CWM 9.2 software.
Note
All processes referring to /usr/users are killed as part of the installation process. Therefore,
do not login as user root when you are already logged in as user svplus. Instead, logout first, then
login as user root.
1
Load the CD into the CD-ROM drive. See “Loading the CD-ROM”.
2
Mount the CD-ROM drive. See “Mounting the Locally Attached CD-ROM Drive”.
3
Export the CD-ROM drive to make it available to other machines if you are installing the
software on a remote machine. See “Mounting a Remotely Attached CD-ROM Drive”.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installing the Cisco WAN Manager 9.2 Software Cisco WAN Manager Installation for Solaris, Release 9.2, Part Number 78-5875-03 3-2 4 Manually install the CWM 9.2 software packages. See “Installing Cisco WAN ManagerManually”. 5 Configure the Statistics Collection Manager. See Section, “Configuring Sta...
Manual Installation Procedures 3-3 Mounting a Remotely Attached CD-ROM Drive Exporting the CD-ROM Drive from a Remote SunOS Host Prior to mounting the CD-ROM drive from the remote host, the device must be made accessible. Thefollowing procedures are performed on the remote system (unless otherwise n...
Installing Cisco WAN Manager Manually Cisco WAN Manager Installation for Solaris, Release 9.2, Part Number 78-5875-03 3-4 Installing Cisco WAN Manager Manually For the manual installation of CWM Release 9.2 to complete successfully, you must have: • Solaris 2.6 operating system installed on your wor...
