Cisco CSACS1121UPK9 - Manual
Cisco CSACS1121UPK9 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Downloading the Cisco Secure ACS 5.2 ISO Image; Download Software; Note; Installing the ACS Server; Verifying the Installation Process, page 5-5; Running the Setup Program; Enter
- Page 3 – Prompt; localhost
- Page 4 – The console requests for the parameters as shown below:; Username
- Page 5 – Verifying the Installation Process; The console displays:; The console displays:
- Page 6 – Resetting the Administrator Password
- Page 7 – Reimaging the ACS Server; Parameter
- Page 8 – At the console prompt, enter
C H A P T E R
5-1
Installation and Upgrade Guide for the Cisco Secure Access Control System 5.2
OL-21574-01
5
Installing and Configuring the Cisco Secure
Access Control System with CSACS-1121
This chapter describes how to install and initially configure CSACS-1121 and the ACS 5.2 server.
This chapter contains:
•
Installation Using the CSACS-1121 Series Appliance, page 5-1
•
Downloading the Cisco Secure ACS 5.2 ISO Image, page 5-2
•
Installing the ACS Server, page 5-2
•
Resetting the Administrator Password, page 5-6
•
Reimaging the ACS Server, page 5-7
Installation Using the CSACS-1121 Series Appliance
The CSACS-1121 appliance is preinstalled with the ACS 5.2 software. This section gives you an
overview of the installation process and the tasks that you must perform before installing ACS.
Before you begin installing ACS 5.2, you must:
1.
Open the box and check the contents. See
Chapter 3, “Unpacking and Checking the Contents of Your
2.
Read
Chapter 2, “Introducing the Cisco 1121 Secure Access Control System Hardware.”
3.
Read the general precautions and safety warnings in
Chapter 3, “Preparing to Install the Cisco 1121
Secure Access Control System Hardware.”
4.
Install the appliance in the rack. See
Chapter 4, “Installing the Cisco 1121 Secure Access Control
5.
Connect the CSACS-1121 to the network and appliance console. See
6.
Power up the CSACS-1121 appliance. See
Chapter 4, “Powering Up the CSACS-1121 Series
7.
Run the
setup
command at the CLI prompt to configure the initial settings for the ACS server. See
Running the Setup Program, page 5-2
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5-2 Installation and Upgrade Guide for the Cisco Secure Access Control System 5.2 OL-21574-01 Chapter 5 Installing and Configuring the Cisco Secure Access Control System with CSACS-1121 Downloading the Cisco Secure ACS 5.2 ISO Image Downloading the Cisco Secure ACS 5.2 ISO Image You can download the...
5-3 Installation and Upgrade Guide for the Cisco Secure Access Control System 5.2 OL-21574-01 Chapter 5 Installing and Configuring the Cisco Secure Access Control System with CSACS-1121 Installing the ACS Server Note You can interrupt the setup process at any time by typing Ctrl-C before the last se...
5-4 Installation and Upgrade Guide for the Cisco Secure Access Control System 5.2 OL-21574-01 Chapter 5 Installing and Configuring the Cisco Secure Access Control System with CSACS-1121 Installing the ACS Server The console requests for the parameters as shown below: localhost login: setup Enter hos...
