Page 3 - C O N T E N T S; Preface; Overview and Specifications
iii Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 C O N T E N T S Preface vii Document Revision History vii Objectives vii Organization viii Electromagnetic Compliance ix Electromagnetic Compatibility Regulatory Statements ix Site Wiring Distance and Interfer...
Page 4 - Preparing for Installation; Installing and Removing the Uplink Cards; Creating a Four-Node Ring Using the Uplink Cards
Contents iv Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 C H A P T E R 2 Preparing for Installation 2-1 Hardware Requirements 2-1 Software Requirements 2-2 Safety and Compliance 2-3 Safety Information and Electromagnetic Compliance 2-3 Safety Warnings 2-3 Di...
Page 5 - Troubleshooting the Uplink Cards
Contents v Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 C H A P T E R 5 Troubleshooting the Uplink Cards 5-1 Verifying the Uplink Card Connection 5-1 LEDs 5-2 DPT and POS/DPT Uplink Card LEDs 5-2 RPR/SRP Uplink Card LEDs 5-4 Troubleshooting the Uplink Cards ...
Page 7 - Document Revision History; Objectives
vii Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections: •...
Page 8 - Organization
viii Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Organization This publication uses the following terminology to refer to the router and the uplink cards: ‘ Organization This document contains the following chapters: Product Name Reference Cisco 107...
Page 9 - Electromagnetic Compliance; Electromagnetic Compatibility Regulatory Statements; Site Wiring Distance and Interference Guidelines; Electromagnetic Interference
ix Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Electromagnetic Compliance Electromagnetic Compliance Electromagnetic compliance information is presented in the following sections: • Electromagnetic Compatibility Regulatory Statements, page ix • Site...
Page 10 - Distance Limitations for Signaling and Unshielded Conductors; Translated Safety Warnings
x Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Translated Safety Warnings Distance Limitations for Signaling and Unshielded Conductors Give special consideration to the effect of a lightning strike in the site vicinity if wires exceed recommended dis...
Page 12 - Related Documentation; Obtaining Documentation; Product Documentation DVD
xii Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Related Documentation Related Documentation The following section lists some reference material out of the Cisco.com library that may be useful for configuring and maintaining the Cisco 10720 Internet ...
Page 13 - Ordering Documentation; Documentation Feedback; Cisco Product Security Overview
xiii Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Documentation Feedback Ordering Documentation Registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL: http://www.cisco.com/go/...
Page 14 - Reporting Security Problems in Cisco Products; Obtaining Technical Assistance; Cisco Technical Support & Documentation Website
xiv Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Obtaining Technical Assistance Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to c...
Page 15 - Submitting a Service Request; Definitions of Service Request Severity
xv Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Obtaining Technical Assistance Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not h...
Page 16 - Obtaining Additional Publications and Information
xvi Cisco 10720 Internet Router Uplink Cards Installation and Configuration 78-13113-06 B0 Preface Obtaining Additional Publications and Information Severity 3 (S3)—Operational performance of the network is impaired, while most business operations remain functional. You and Cisco will commit resourc...
Page 19 - Product Number and Product Names
C H A P T E R 1-1 Book Title 78-13113-06 B0 1 Overview and Specifications This publication contains instructions for installing and configuring the OC-48 RPR/SRP, OC-48/STM-16c DPT, and OC-48/STM-16c POS uplink cards as well as the console/auxiliary card on the Cisco 10720 Internet Router. Refer to ...
Page 20 - DPT Uplink Card Faceplate and Specifications
1-2 Book Title 78-13113-06 B0 Chapter 1 Overview and Specifications DPT Uplink Card Faceplate and Specifications The Cisco 10720 Internet Router provides network access using Ethernet and optional Dynamic Packet Transport (DPT), Packet over SONET (POS), or IEEE 802.17 RPR technology for optical conn...
Page 21 - POS/DPT Uplink Card Faceplate and Specifications
1-3 Book Title 78-13113-06 B0 Chapter 1 Overview and Specifications POS/DPT Uplink Card Faceplate and Specifications POS/DPT Uplink Card Faceplate and Specifications This section provides faceplate identification and specifications for the POS/DPT uplink card. Figure 1-2 Cisco 10720 Internet Router ...
Page 23 - RPR/SRP Uplink Card Faceplate and Specifications; OC48 SFP Module Specifications
1-5 Book Title 78-13113-06 B0 Chapter 1 Overview and Specifications RPR/SRP Uplink Card Faceplate and Specifications RPR/SRP Uplink Card Faceplate and Specifications This section provides faceplate identification and specifications for the RPR/SRP uplink card. Figure 1-3 Cisco 10720 Internet Router ...
Page 24 - Optical Cable Specifications
1-6 Book Title 78-13113-06 B0 Chapter 1 Overview and Specifications Optical Cable Specifications Optical Cable Specifications Table 1-7 provides optical cable specifications for the uplink cards. Table 1-5 OC48 SFP Module Specifications for the RPR/SRP Uplink Card Specification Description Dimension...
Page 25 - Console/Auxiliary Card Faceplate and Specifications
1-7 Book Title 78-13113-06 B0 Chapter 1 Overview and Specifications Console/Auxiliary Card Faceplate and Specifications Additional feature information is available online in the Cisco IOS Software Configuration for the Cisco 10720 Internet Router document and in the Cisco 10720 Internet Router Insta...
Page 27 - Hardware Requirements
C H A P T E R 2-1 Book Title 78-13113-06 B0 2 Preparing for Installation Installation prerequisites and preparation information for installing an uplink card in a Cisco 10720 router are in the following sections: • Hardware Requirements, page 2-1 • Software Requirements, page 2-2 • Safety and Compli...
Page 28 - Software Requirements
2-2 Book Title 78-13113-06 B0 Chapter 2 Preparing for Installation Software Requirements Software Requirements The DPT uplink card is compatible with the following router system software: • Cisco IOS Release 12.0(19)SP or later releases of Cisco IOS 12.0 SP • Cisco IOS Release 12.0(22)S or later rel...
Page 29 - Safety and Compliance; Safety Information and Electromagnetic Compliance; Safety Warnings; Disconnect Device Warning
2-3 Book Title 78-13113-06 B0 Chapter 2 Preparing for Installation Safety and Compliance Safety and Compliance Before you begin any of the procedures in this publication, review the safety and compliance guidelines in the following sections to avoid injuring yourself or damaging the equipment: • Saf...
Page 30 - Laser Safety; Class 1 Laser Product Warning; Class 1 LED Product Warning; Preventing Electrostatic Discharge
2-4 Book Title 78-13113-06 B0 Chapter 2 Preparing for Installation Safety and Compliance Warning This unit might have more than one power cord. To reduce the risk of electric shock, disconnect the two power supply cords before servicing the unit Warning Incorporate a readily accessible two-poled dis...
Page 33 - Tools and Equipment Required
C H A P T E R 3-1 Book Title 78-13113-06 B0 3 Installing and Removing the Uplink Cards This chapter provides information about installing and removing the uplink cards. The following sections are in this chapter: • Tools and Equipment Required, page 3-1 • Preparing for Installation, page 3-2 • Remov...
Page 34 - Powering Down the Router
3-2 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Preparing for Installation Preparing for Installation Please read the following instructions when preparing to remove an uplink card from the Cisco 10720 Internet Router: • Powering Down the Router, page 3-2 • Verifying...
Page 36 - Verifying That the Router Is Powered Down; Removing the Cable-Management System
3-4 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Removing the Cable-Management System Figure 3-3 Removing the DC Power Leads from the Terminal Block Note The DC site power source must be disconnected to ensure proper safety is maintained. Step 5 Loosen the three locki...
Page 38 - Removing the RPR/SRP Uplink Card SFP Modules
3-6 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Removing the Cable-Management System Figure 3-6 Disconnecting the Optical Interface Cable Step 3 Remove the optical interface cables. To remove the RPR/SRP uplink card SFP modules, go to the “Removing the RPR/SRP Uplink...
Page 40 - Removing the Uplink Card
3-8 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Removing the Uplink Card Removing the Uplink Card Use the instructions in this section to remove an uplink card. Step 1 Remove any console port cable or auxiliary port cable from the card. Figure 3-9 Spring-Loaded Screw...
Page 41 - Installing an Uplink Card
3-9 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Installing an Uplink Card Installing an Uplink Card Perform the following steps to safely install an uplink card into the router: Step 1 Confirm that the cable-management cover is removed, the router is powered down, an...
Page 42 - Installing the OC48 SFP Modules in the RPR/SRP Uplink Card
3-10 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Installing an Uplink Card Installing the OC48 SFP Modules in the RPR/SRP Uplink Card Use the information in this section to install OC48 SFP modules in the RPR/SRP uplink card. Note Use only OC48 SFP modules purchased ...
Page 47 - Installing the Cable-Management System
3-15 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Installing the Cable-Management System Installing the Cable-Management System The cable-management system, located on the front of the router, organizes the interface cables. To keep the cables free of sharp bends, ext...
Page 48 - Turning On Power to the Router
3-16 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Turning On Power to the Router Figure 3-21 Installing Cable-Management Cover Step 5 Using a Number 1 Phillips screwdriver, attach the cable-management cover to the cable-management tray. (See Figure 3-21 .) Figure 3-22...
Page 49 - Connecting the AC Power Supply
3-17 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Turning On Power to the Router Connecting the AC Power Supply Warning Before you install, operate, or service the system, read the Regulatory Compliance and Safety Information for the Cisco 10720 Internet Router public...
Page 51 - Connecting the DC Power Supply
3-19 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Turning On Power to the Router Figure 3-26 Power Switch in the On Position Step 5 Press the power switch to on the (–) position. (See Figure 3-26 .) Connecting the DC Power Supply Warning When you install the unit, the...
Page 55 - Verifying Uplink Card Functionality
3-23 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Verifying Uplink Card Functionality Verifying Uplink Card Functionality Observe the LEDs card is initialized (see Figure 3-31 ) and consult the LED tables in Chapter 5, “Troubleshooting the Uplink Cards,” to verify the...
Page 56 - Configuring Basic POS Functionality; RPR Functionality; Configuring Basic SRP Functionality
3-24 Book Title 78-13113-06 B0 Chapter 3 Installing and Removing the Uplink Cards Configuring the RPR/SRP, DPT, and POS/DPT Uplink Card Interfaces • Configuring Basic SRP Functionality, page 3-24 • Troubleshooting the Uplink Cards Installation, page 5-6 Configuring Basic POS Functionality The basic ...
Page 63 - Verifying the Uplink Card Connection
C H A P T E R 5-1 Book Title 78-13113-06 B0 5 Troubleshooting the Uplink Cards This chapter contains the following sections: • Verifying the Uplink Card Connection, page 5-1 • LEDs, page 5-2 • Troubleshooting the Uplink Cards Installation, page 5-6 • Troubleshooting the RPR/SRP Uplink Card Installat...
Page 64 - LEDs
5-2 Book Title 78-13113-06 B0 Chapter 5 Troubleshooting the Uplink Cards LEDs LEDs The following LED information is found in this section: • DPT and POS/DPT Uplink Card LEDs, page 5-2 • RPR/SRP Uplink Card LEDs, page 5-4 DPT and POS/DPT Uplink Card LEDs Information on both uplink card specific LEDs ...
Page 66 - RPR/SRP Uplink Card LEDs
5-4 Book Title 78-13113-06 B0 Chapter 5 Troubleshooting the Uplink Cards LEDs RPR/SRP Uplink Card LEDs Information on both uplink card specific LEDs and system LEDs for the RPR/SRP uplink cards is located in this section. The LEDs located on the left side of the RPR/SRP uplink card provide RPR and S...
Page 68 - Troubleshooting the Uplink Cards Installation; Fiber Misconnection—DPT Uplink Cards; Fiber Misconnection—RPR/SRP Uplink Card; Alarm Messages
5-6 Book Title 78-13113-06 B0 Chapter 5 Troubleshooting the Uplink Cards Troubleshooting the Uplink Cards Installation Troubleshooting the Uplink Cards Installation Read the following troubleshooting tips to help verify a successful installation of the uplink cards: • Fiber Misconnection—DPT Uplink ...
Page 76 - Troubleshooting the RPR/SRP Uplink Card Installation
5-14 Book Title 78-13113-06 B0 Chapter 5 Troubleshooting the Uplink Cards Troubleshooting the RPR/SRP Uplink Card Installation Troubleshooting the RPR/SRP Uplink Card Installation Use the transceiver keyword to display additional information about the status of the small form-factor pluggable (SFP) ...
Page 77 - Troubleshooting the POS Uplink Card Installation; Alarm Processing
5-15 Book Title 78-13113-06 B0 Chapter 5 Troubleshooting the Uplink Cards Troubleshooting the POS Uplink Card Installation Static information ID: SFP transceiver Extended ID: 4 Connector: LC SONET compliance: OC48SR Gigabit Ethernet compliance: unspecified Fibre Channel link length: unspecified Fibr...
Page 79 - Loopback Testing; Additional Troubleshooting Resources; Cleaning the Fiber-Optic Connections
5-17 Book Title 78-13113-06 B0 Chapter 5 Troubleshooting the Uplink Cards Additional Troubleshooting Resources Loopback Testing The POS uplink card supports two loopback modes for network testing, fault isolation, and agency compliance. The uplink card loopback modes are: Internal loopback mode—Pack...
Page 81 - I N D E X
IN-1 Book Title 78-13113-06 B0 I N D E X A AC power supply 3-17 alarm messages 5-6 keepalive alarm messages for all uplink cards 5-7 C cable connections four-node DPT ring 4-2 four-node IEEE 802.17 mode ring 4-4 cable-management system, installing 3-15 Class 1 laser product warning 2-4 Class 1 LED p...
