Page 2 - Cisco 90-Day Limited Hardware Warranty Terms; Information Packet Number; Duration of Hardware Warranty
2 Revised November 2007, 78-17436-03 1 Cisco 90-Day Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicabl...
Page 3 - Overview
3 To Receive a Return Materials Authorization (RMA) Number Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative. Complete the information below, and keep it for reference: Product Serial Number ...
Page 4 - Hardware Features
4 Figure 1 Cisco 815 Integrated Services Router Hardware Features The Cisco 815 integrated services router has the following hardware features: • One cable modem Data-Over-Cable Service Interface Specification (DOCSIS) port • One 10/100 Fast Ethernet port • Four 10/100BASE-TX Ethernet switch ports •...
Page 5 - Items Included with the Cisco 815 Integrated Services Router
5 3 Documents, Equipment, and Tools This section describes the documents, equipment, and tools included with the Cisco 815 integrated services router. Items Included with the Cisco 815 Integrated Services Router When you unpack the box containing your Cisco 815 integrated services router, you should...
Page 6 - Translated Versions; Ports and LEDs; Back Panel Ports and LEDs
6 Items Not Included with the Cisco 815 Integrated Services Router One or more items in this list may be required for your installation: • PC running terminal emulation software, or a modem for remote administrative access • Cable for cable-modem interface • Cable ties • Number-2 Phillips screwdrive...
Page 7 - Description; LED Label
7 Figure 4 WIC-4ESW 4 WIC 1 slot 10 10/100-Mbps Fast Ethernet port 5 Power switch 11 FDX, 100, and LINK LEDs 6 Power socket 12 WIC 0 OK LED Table 1 Back Panel Connectors Connector/Slot Label/Color Description Fast Ethernet port 10/100 ETHERNET (yellow) Connects the router to the local Ethernet netwo...
Page 8 - Front Panel LEDs
8 Figure 5 HWIC-CABLE-D-2 Front Panel LEDs Use the router front panel LEDs to determine network activity and status on the Ethernet WIC ports. See Figure 6 and Table 3 . Figure 6 Front Panel LEDs Table 3 Front Panel LEDs LED Label Color Description PWR Green On when DC power is being supplied to the...
Page 9 - Install the Router; Safety Information
9 5 Install the Router Set the Cisco 815 integrated services router on a desktop or table. Attach the four rubber feet to the bottom of the chassis. For more detailed installation instructions, see the Cisco 815 integrated services router hardware installation documentation at the following URL: htt...
Page 10 - Warnings and Cautions; Statement 1071—Warning Definition
10 Warnings and Cautions When you install the Cisco 815 integrated services router, observe the warnings and precautions in this section. In addition, for safety information you must know before working on your Cisco router, see the Regulatory Compliance and Safety Information for Cisco 800 Series a...
Page 15 - Connect to the Router
15 Warning Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. Statement 1 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Warning To prevent the system from overheating, do not...
Page 16 - Cable Connections; Warning; Connecting the Router Console Port to a Terminal or PC
16 Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Note The installation must comply with all required electrical codes a...
Page 17 - Interface Numbering; Slot Type
17 Figure 7 Connecting the Console Cable to the Router Step 3 Connect the DB-9 end of the console cable to the serial port on your PC. If this connection does not fit your PC serial port, you must provide an adapter. 7 Interface Numbering Table 4 summarizes interface numbering on a Cisco 815 integra...
Page 18 - Power Up the Router; Checklist for Power-Up; Note; Note; Caution
18 8 Power Up the Router This section provides the procedures for powering up your Cisco 815 integrated services router. Caution To ensure adequate cooling, never operate the router unless the cover and all WICs and cover plates are installed. Checklist for Power-Up You are ready to power up the Cis...
Page 19 - Verifying the Hardware Configuration; show version; Perform Initial Configuration
19 Note Because Cisco SDM is installed on your router by default, we recommend using Cisco SDM to perform the initial configuration. See the “Configure the Router Using Cisco Router and Security Device Manager” section on page 19 to learn how to configure your router using Cisco SDM, or how to obtai...
Page 20 - Router
20 Setting Up the Initial Configuration Using the Setup Command Facility This section shows how to use the setup command facility to configure a hostname for the Cisco 815 integrated services router, to set passwords, and to configure an interface for communication with the management network. If th...
Page 22 - Verifying the Initial Configuration; Where to Go Next; Tip
22 [1] Return back to the setup without saving this config. [2] Save this configuration to nvram and exit. Enter your selection [2]: 2 Building configuration... Use the enabled mode 'configure' command to modify this configuration. Press RETURN to get started! The user prompt appears: Router> Ver...
Page 23 - Obtaining Documentation; Product Documentation DVD; Documentation Feedback
23 11 Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can acce...
Page 24 - Cisco Product Security Overview; Reporting Security Problems in Cisco Products; Obtaining Technical Assistance
24 13 Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html From this site, you will find information about how to: • Report security vulnerabilities in Cisco prod...
Page 25 - Cisco Technical Support & Documentation Website; Cisco Product Identification Tool; Submitting a Service Request; Definitions of Service Request Severity
25 Cisco Technical Support & Documentation Website The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL: http://www...
Page 26 - Obtaining Additional Publications and Information
26 15 Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. • The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief product overviews, key ...
