Cisco AS5350XM - Manual
Cisco AS5350XM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Preventing Electrostatic Discharge Damage
- Page 3 – Required Tools and Equipment; Preparing to Connect to a Network
- Page 4 – Ethernet Connections; Console and Auxiliary Ports; Console Port
- Page 5 – Auxiliary Port; T Serial Ports; Alarm Port; BITS Port
- Page 6 – Power Supply Considerations
C H A P T E R
2-1
Cisco AS5350XM Universal Gateway Chassis Installation Guide
OL-6417-02
2
Preparing to Install the Cisco AS5350XM
Universal Gateway
This chapter describes the tasks you must perform before you begin to install the Cisco AS5350XM
universal gateway and includes the following sections:
•
Safety Recommendations, page 2-1
•
Required Tools and Equipment, page 2-3
•
Preparing to Connect to a Network, page 2-3
Safety Recommendations
Any device that uses electricity must be handled carefully; follow these guidelines to ensure general
safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
Put the removed chassis cover in a safe place.
•
Keep tools away from walk areas where you and others could fall over them.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
•
Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
•
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Maintaining Safety with Electricity
Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals.
Statement 43
Follow these guidelines when you work on equipment powered by electricity.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2-2 Cisco AS5350XM Universal Gateway Chassis Installation Guide OL-6417-02 Chapter 2 Preparing to Install the Cisco AS5350XM Universal Gateway Safety Recommendations • Locate the emergency power-OFF switch for the room in which you are working. Then, if anelectrical accident occurs, you can act quic...
2-3 Cisco AS5350XM Universal Gateway Chassis Installation Guide OL-6417-02 Chapter 2 Preparing to Install the Cisco AS5350XM Universal Gateway Required Tools and Equipment Required Tools and Equipment The following items are included with the universal gateway: • 19- (48.26-) and 24-inch (60.96-cm) ...
2-4 Cisco AS5350XM Universal Gateway Chassis Installation Guide OL-6417-02 Chapter 2 Preparing to Install the Cisco AS5350XM Universal Gateway Preparing to Connect to a Network Warning The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact.Do not attempt t...
