Cisco AIR-ANT5959 - Manual

Cisco AIR-ANT5959

Cisco AIR-ANT5959 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – System Requirements
  • Page 3 – Installation Notes; Installation Instructions; Suspended Ceilings With Flush Mounted Tiles
  • Page 4 – Suspended Ceilings With Recessed Tiles
  • Page 6 – Obtaining Technical Assistance; Technical Assistance Center
  • Page 7 – Cisco TAC Web Site; Cisco TAC Escalation Center
Loading the manual

Corporate Headquarters:

Copyright © 2002. Cisco Systems, Inc. All rights reserved.

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco Aironet 2 dBi Diversity Omnidirectional
Ceiling Mount Antenna (AIR-ANT5959)

Overview

This document outlines the specifications and description of the 2-dBi diversity omnidirectional ceiling
mount antenna. This antenna operates in the 2400 - 2500 MHz band and is designed for use where an
unobtrusive ceiling mounted antenna is required. The antenna is compatible with Cisco Aironet radio
products utilizing a reverse-polarity threaded naval connector (RP-TNC) connector.

Technical Specifications

Antenna type

Omnidirectional
patch

Operating frequency range

2.4 - 2.5 GHz

Nominal VSWR

1.7:1

Peak gain

2 dBi

Polarization

Vertical, linear

Azimuth plane beamwidth

Omnidirectional

Elevation plane 3 dB
beamwidth

70 degrees

Cable

3 ft (0.9 mm) plenum
rated

Dimensions

5.3 x 2.8 x 0.9 in
(13.5 x 7.1 x 2.3 cm)

Weight

0.3 lbs. (0.14 kg)

Connector type

RP-TNC Male

Environment

Indoor, ceiling mount

74524

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - System Requirements

2 Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna (AIR-ANT5959) 78-13213-03 System Requirements System Requirements A 2.4-GHz Cisco device that utilizes a RP-TNC connector. Installation Notes Because antennas transmit and receive radio signals, they are susceptible to RF obstruct...

Page 3 - Installation Notes; Installation Instructions; Suspended Ceilings With Flush Mounted Tiles

3 Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna (AIR-ANT5959) 78-13213-03 Installation Notes – Concrete and wood block walls limit signal penetration to three or four walls. – A signal can penetrate five or six walls constructed of drywall or wood. – A thick metal wall causes s...

Page 4 - Suspended Ceilings With Recessed Tiles

4 Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna (AIR-ANT5959) 78-13213-03 Installation Instructions Step 1 Remove the two ceiling tiles on either side of the ceiling track. Step 2 Line up the antenna’s mounting clips with the track. Step 3 Grasp the antenna with one hand and th...

Other Cisco Models

All Cisco Other