Cisco AIR-ANT1728 - Manual
Cisco AIR-ANT1728 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Choosing a Mounting Location
- Page 3 – Installing the Antenna
- Page 4 – Suggested Cable
Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Aironet High Gain Omnidirectional Ceiling
Mount Antenna (AIR-ANT1728)
Overview
This document outlines the specifications, describes the high gain omnidirectional ceiling mount
antenna, and provides instructions for mounting it on a suspended ceiling track. Designed for WLAN
applications operating in the 2.4- to 2.5-GHz frequency range, the antenna has a nominal gain of 5.2 dBi.
The antenna is used primarily with access points, but is compatible with Cisco Aironet radio products
utilizing a reverse-polarity threaded Neil Concelman (RP-TNC) connector.
Technical Specifications
Antenna type
Dipole
Operating frequency range
2.4- to 2.483-GHz
VSWR
Less than 2:1, 1.5:1
nominal
Gain
5.2 dBi
Polarization
Vertical
E-Plane (3dB bandwidth)
40 degrees
H-Plane (3dB bandwidth)
Omnidirectional
Cable length and type
3 ft (0.91 m)
Plenum rated RG-58
Dimensions (H x W)
11.5 in. x 1.25 in.
(29.2 cm x 3.2 cm)
Weight
4.6 oz (131 g)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Cisco Aironet High Gain Omnidirectional Ceiling Mount Antenna (AIR-ANT1728) 78-14721-02 System Requirements This antenna is designed for use with Cisco Aironet access points, but can be used with any 2.4-GHz Cisco Aironet radio device that utilizes a RP-TNC connector. Installation Notes Choosing a...
3 Cisco Aironet High Gain Omnidirectional Ceiling Mount Antenna (AIR-ANT1728) 78-14721-02 Installing the Antenna Follow these steps to install the antenna on a suspended ceiling track. Step 1 Determine the location you wish to mount the antenna. Step 2 Loosen the hex nut on the ceiling track bracket...
4 Cisco Aironet High Gain Omnidirectional Ceiling Mount Antenna (AIR-ANT1728) 78-14721-02 Note If you use another mount, make sure the length of the threaded stud does not exceed 0.35 inch (0.9 centimeter). Step 7 Use cable ties or electrical tape to secure the antenna coaxial cable along the ceilin...
