Cisco 78-13342-03 - Manual
Cisco 78-13342-03 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Ethernet Network Cabling Guidelines; Signal; Specification
- Page 3 – Console Cable and Adapter; Adapter
- Page 4 – shows how to connect the VICs to the network.; lists the pinouts for FXS and FXO VIC connectors.; Pins that are not used should not be connected.; Pin; Ring
- Page 5 – Cables and Pinouts for 2-Port ISDN BRI Card
B-1
Cisco 1760 Modular Access Router Hardware Installation Guide
78-13342-03
A P P E N D I X
B
Cabling Specifications
This appendix describes cables and cabling guidelines for the router and contains
the following sections:
•
•
Ethernet Network Cabling Guidelines
•
•
•
Cables and Pinouts for 2-Port ISDN BRI Card
Note
For detailed information about cables used with Cisco WICs and VICs, refer to
the Cisco WAN Interface Cards Hardware Installation Guide that comes with
each of the cards.
Ethernet Cables
This section describes the Ethernet cables that you use to connect the router to
your local Ethernet network. A 10/100BASE-TX router, such as the Cisco 1760
router, requires Category 5 twisted-pair cable.
describes the pinouts for
an RJ-45-to-RJ-45 Ethernet cable.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Appendix B Cabling Specifications Ethernet Network Cabling Guidelines B-2 Cisco 1760 Modular Access Router Hardware Installation Guide 78-13342-03 Ethernet Network Cabling Guidelines Table B-2 describes guidelines for creating Ethernet networks. Numbers might vary, depending on the manufacturer of t...
B-3 Cisco 1760 Modular Access Router Hardware Installation Guide 78-13342-03 Appendix B Cabling Specifications Console Cable and Adapter Console Cable and Adapter A console cable is provided with your router. Use this cable to connect the routerto a PC or terminal. A DB-9-to-DB-25 adapter is also pr...
Appendix B Cabling Specifications VIC Cables and Pinouts B-4 Cisco 1760 Modular Access Router Hardware Installation Guide 78-13342-03 • Standard RJ-48S connector and cable to connect E&M VIC ports (brown) toa PBX line. The cable wiring depends on the PBX type and connection. Fordetails, refer to...
