Cisco 78-10588-03 - Manual
Cisco 78-10588-03 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Unpacking and Inspecting the System; Cisco Metro 1500 Series Hardware Installation Guide
- Page 3 – Maintaining a Network Record
- Page 4 – Installing the System; Mount each unit in a cabinet or a rack.; Connect to the serial port.
- Page 5 – Change the SNMP configuration.; Installing the NEMI Module
- Page 6 – Save the blank filler panels with the packaging material.
- Page 7 – Installing the DEMI Module; To install a DEMI module, follow these steps:
- Page 8 – Connecting Power
- Page 9 – Connecting AC Power
- Page 11 – Connecting DC Power; To connect the power cables for the US version, follow these steps:
- Page 13 – Turn the power on using the corresponding power switch of the PDU.
- Page 17 – Power Consumption and Power Supply Fuses; Power Type
- Page 18 – Grounding the Chassis; Cleaning the System; Region
- Page 19 – Cleaning the Chassis; Do not use wet tissues for cleaning the product's outer housing.; Cleaning the Connectors
- Page 20 – To clean the optical connectors, follow these steps:
- Page 21 – Removing the Power Supply Module
- Page 23 – Determining Power Supply Status
- Page 24 – Pull out the malfunctioning module.
- Page 25 – Running Online Tests; Verifying Connections
- Page 26 – Measuring Channel Outputs and Channel Budgets; All power measurements must be done in-line because of ALS.
- Page 28 – Troubleshooting; Problem
C H A P T E R
3-1
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
3
Installing the Chassis
This chapter describes how to install and test the Cisco Metro 1500 series system
chassis. The equipment is installed during normal working hours. It is usually
connected to active CPU channels or control units after working hours.
This chapter includes the following sections:
•
•
Installing the System, page 3-4
•
•
Cleaning the System, page 3-18
•
Removing the Power Supply Module, page 3-21
•
Running Online Tests, page 3-25
•
Before Installing
Before you install the system, you must complete the following tasks:
•
Unpacking and Inspecting the System
•
•
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Chapter 3 Installing the Chassis Before Installing 3-2 Cisco Metro 1500 Series Hardware Installation Guide 78-10588-03 Caution Use extreme care when removing or installing connectors so you donot damage the connector housing or scratch the end-face surface ofthe fiber. Always install protective cove...
3-3 Cisco Metro 1500 Series Hardware Installation Guide 78-10588-03 Chapter 3 Installing the Chassis Before Installing Upon receipt, inspect the equipment as follows: Step 1 Take inventory. Compare the equipment inside with the packing slip and the equipment listprovided by customer service. If ther...
Chapter 3 Installing the Chassis Installing the System 3-4 Cisco Metro 1500 Series Hardware Installation Guide 78-10588-03 Caution Because of rack mounting, the plugs of the power cables on the rearside of the unit might not be accessible. Please provide a powercircuit breaker to allow front power a...
