Cisco 71 - Manual
Cisco 71 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Providing Power to the Cisco Unified IP Phone
- Page 4 – Power Guidelines
- Page 5 – Obtaining Additional Information about Power; Understanding Phone Configuration Files
- Page 7 – Understanding the Phone Startup Process
- Page 9 – Adding Phones with Auto-Registration
- Page 10 – Adding Phones with Auto-Registration and TAPS
- Page 11 – Adding Phones with BAT; Using Cisco Unified IP Phones with Different Protocols
- Page 12 – Converting a New Phone from SCCP to SIP; Converting an In-Use Phone from One Protocol to the Other; Deploying a Phone in an SCCP and SIP Environment
- Page 13 – Determining the MAC Address for a Cisco Unified IP Phone
C H A P T E R
2-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
2
Preparing to Install the Cisco Unified IP Phone on
Your Network
Cisco Unified IP Phones enable you to communicate by using voice over a data network. To provide this
capability, the IP Phones depend upon and interact with several other key Cisco Unified IP Telephony
components, including Cisco Unified Communications Manager.
This chapter focuses on the interactions between the Cisco Unified IP Phones 7962G, 7942G, 7961G,
7961G-GE, 7941G, and 7941G-GE and Cisco Unified Communications Manager, DNS and DHCP
servers, TFTP servers, and switches. It also describes options for powering phones.
For related information about voice and IP communications, refer to this URL:
http://www.cisco.com/en/US/products/sw/voicesw/index.html
This chapter provides an overview of the interaction between the Cisco Unified IP Phone and other key
components of the Voice over IP (VoIP) network. It includes the following topics:
•
Understanding Interactions with Other Cisco Unified IP Telephony Products, page 2-1
•
Providing Power to the Cisco Unified IP Phone, page 2-3
•
Understanding Phone Configuration Files, page 2-5
•
Understanding the Phone Startup Process, page 2-7
•
Adding Phones to the Cisco Unified Communications Manager Database, page 2-8
•
Using Cisco Unified IP Phones with Different Protocols, page 2-11
•
Determining the MAC Address for a Cisco Unified IP Phone, page 2-13
Understanding Interactions with Other Cisco Unified IP
Telephony Products
To function in the IP telephony network, the Cisco Unified IP Phone must be connected to a networking
device, such as a Cisco Catalyst switch. You must also register the Cisco Unified IP Phone with a Cisco
Unified Communications Manager system before sending and receiving calls.
This section includes the following topics:
•
•
Understanding How the Cisco Unified IP Phone Interacts with the VLAN, page 2-2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2-3 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1 OL-18913-01 Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Providing Power to the Cisco Unified IP Phone You can resolve these issues by isolating the voice traffic onto a separate...
2-4 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1 OL-18913-01 Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Providing Power to the Cisco Unified IP Phone Power Guidelines Table 2-1 provides guidelines for powering the Cisco Unifi...
2-5 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1 OL-18913-01 Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Understanding Phone Configuration Files Obtaining Additional Information about Power For related information about power,...
