Cisco 12.2(35)SE - Manual
Cisco 12.2(35)SE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents
- Page 3 – System Requirements; Hardware Supported; Hardware Requirements
- Page 4 – Upgrading the Switch Software; Finding the Software Version and Feature Set; Archiving Software Images
- Page 5 – Upgrading a Switch by Using the Device Manager; Upgrading a Switch by Using the CLI
- Page 6 – Recovering from a Software Failure; Installation Notes
- Page 7 – Limitations and Restrictions; Cisco IOS Limitations; Configuration
- Page 8 – Ethernet; IP; IP Telephony
- Page 9 – MAC Addressing Multicasting
- Page 10 – QoS
- Page 11 – VLAN; Device Manager Limitations; Important Notes; Cisco IOS Notes
- Page 12 – Device Manager Notes
- Page 13 – Open Caveats; Open Cisco IOS Caveats
- Page 15 – Resolved Caveats
- Page 16 – Updates to System Message Guide
- Page 19 – Related Documentation; Obtaining Documentation; Product Documentation DVD
- Page 20 – Ordering Documentation; Documentation Feedback
- Page 21 – Reporting Security Problems in Cisco Products; Product Alerts and Field Notices
- Page 22 – Obtaining Technical Assistance; Cisco Support Website
- Page 23 – Submitting a Service Request; Definitions of Service Request Severity; Obtaining Additional Publications and Information
Corporate Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Cisco Catalyst
Blade Switch 3040 for FSC,
Cisco IOS Release 12.2(35)SE
January 8, 2007
Cisco IOS Release 12.2(35)SE runs on the Cisco Catalyst Blade Switch 3040 for FSC, referred to as the
switch. The switch is installed in the Fujitsu Siemens Computers (FSC) PRIMERGY BX600 system,
referred to as the BX600 system.
Note
Before you install the switch in the BX600 system, upgrade the BX600 system management software to
version 1.68 or later for the switch to operate properly.
Check for updates to this document at this URL for information about compatibility with the BX600
system software:
http://www.cisco.com/en/US/products/ps6748/prod_release_notes_list.html
These release notes include important information about Cisco IOS Release 12.2(35)SE and any
limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct for
your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the switch packaging.
•
If your switch is on, use the show version privileged EXEC command. See the
Software Version and Feature Set” section on page 4
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
“Deciding Which Files to Use” section on page 4
For the complete list of Cisco Catalyst Blade Switch 3040 for FSC documentation, see the
Documentation” section on page 19
You can download the switch software from this site (registered Cisco.com users with a login password):
http://www.cisco.com/kobayashi/sw-center/sw-lan.shtml
This software release is part of a special release of Cisco IOS software that is not released on the same
8-week maintenance cycle that is used for other platforms. As maintenance releases and future software
releases become available, they will be posted to Cisco.com in the Cisco IOS software area.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Contents Contents This information is in the release notes: • “System Requirements” section on page 3 • “Upgrading the Switch Software” section on page 4 • “Installation Notes” section on page ...
3 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 System Requirements System Requirements The system requirements are described in these sections: • “Hardware Supported” section on page 3 • “Device Manager System Requirements” section on page ...
4 Release Notes for the Cisco Catalyst Blade Switch 3040 for FSC, Cisco IOS Release 12.2(35)SE OL-12212-01 Upgrading the Switch Software Upgrading the Switch Software These are the procedures for downloading software. Before downloading software, read this section forimportant information: • “Findin...
