Cisco 116T - Manual
Cisco 116T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Feature Summary; Front Panel Description; Ports; Feature; Compatibility
- Page 4 – LEDs; RPS LED; Off
- Page 5 – high number of collisions causes the LED to appear solid amber.
- Page 7 – UTL Mode; Utilization LED Scale; ID Mode; LED
- Page 8 – Mode Button; Rear Panel Description; Warning; Use the Cisco RPS (model NFS0600-9632PE) only to power the external; Rear Panel Connector
- Page 9 – Examples of Using the FastHub; Workgroups; FastHubs in a Workgroup Application
- Page 10 – Server Farms; FastHubs in a Server Farm Application
- Page 11 – Extended Network System; FastHub in an Extended Network Application
C H A P T E R
Overview 1-1
1
Overview
The FastHub 116T is an unmanaged 16-port 100BaseT Class II repeater for workgroups
and server farms. It is a member of an extended network system of stackable, modular LAN
and WAN products that increase LAN performance, connect remote offices and users, and
provide secure access. Figure 1-1 shows the network system units.
Figure 1-1
FastHub 116T in an Extended Network System of Stackable LAN and
WAN Products
1x
16x
16
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
13x
14x
15x
H10259
Routers
Switches
Hubs
Redundant
power system
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1-2 FastHub 116T Installation Guide Feature Summary Feature Summary The FastHub has 16 fixed 100BaseTX ports (with an alternative uplink port for connectingto other 100BaseTX hubs). Table 1-1 summarizes the FastHub features. Table 1-1 Feature Summary Front Panel Description The front panel of the Fa...
1-4 FastHub 116T Installation Guide Front Panel Description LEDs You can use the FastHub LEDs to monitor network activity and performance. Figure 1-3shows the location of the LEDs and the Mode button. Figure 1-3 LEDs and Mode Button RPS LED The redundant power system LED shows the status of the RPS ...
Overview 1-5 Front Panel Description SYSTEM LED The system status LED shows whether the FastHub is powered up and provides anindication of any problem with the main system board of the FastHub (see Table 1-3). Note The system status LED and RPS LED are used together to isolate internal power supply ...
