Cisco 11000 - Manual
Cisco 11000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Serial Console CLI Instructions; Telnet CLI Instructions
- Page 3 – GUI Instructions; Operational Notes
- Page 4 – Network Design and Command Notes; Secure Server Notes
- Page 5 – CLI Notes
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2002. Cisco Systems, Inc. All rights reserved.
78-14640-03
Release Note for the Cisco 11000 Series Secure
Content Accelerator: SCA/SCA2
This release note applies to the Cisco 11000 Series Secure Content Accelerator, SCA and SCA2
versions. The note supplements information found in the Cisco 11000 Series Secure Content Accelerator
Configuration Guide distributed with version 4.1 of the firmware. The SCA2 offers significantly higher
performance than the other SCA device.
The Cisco 11000 Series Secure Content Accelerator is compatible with all Cisco content switches—the
CSS 11500 and CSS 11000 Series Content Services Switches, the Cisco LocalDirector, and the Content
Switching Module for the Catalyst 6500.
The following sections are presented in this note:
•
•
•
CD Contents
The CD-ROM contains the following resources:
•
Flash image
•
Electronic versions of this document and the Cisco 11000 Series Secure Content Accelerator
Configuration Guide
Reflashing the Firmware
The fw directory contains the firmware image of the SCA2. Use the following instructions to reflash the
firmware on the device. Please read the entire document before proceeding with the flash procedure.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Release Note for the Cisco 11000 Series Secure Content Accelerator: SCA/SCA2 78-14640-03 Reflashing the Firmware Serial Console CLI Instructions Note When flashing the SCA, use the file css-sca-2fe-k9.phz. 1. Copy the firmware image to an HTTP, FTP, or TFTP server on the same LAN as the Secure Con...
3 Release Note for the Cisco 11000 Series Secure Content Accelerator: SCA/SCA2 78-14640-03 What’s New in 4.1 GUI Instructions Note When flashing the SCA, use the file css-sca-2fe-k9.phz. 1. Open a Web browser and connect to the Secure Content Accelerator. 2. Ensure that the General>Status page is...
4 Release Note for the Cisco 11000 Series Secure Content Accelerator: SCA/SCA2 78-14640-03 Operational Notes • Changing terminal settings in variance with the actual window size can affect the readlinecapabilities of the device: the displayed cursor position might not be indicative of its actual pos...
