Cisco 10000 Series - Manual
Cisco 10000 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Upgrade Paths and Compatibility
- Page 3 – Rollback Procedure for Option 1
- Page 4 – Upgrade Option 2: ESR-PRE2 Upgrade with Cold Start
- Page 5 – Rollback Procedure for Option 2; Upgrade Option 3: ESR-PRE1 Upgrade with RPR Switchover
- Page 7 – Rollback Procedure for Option 3
- Page 8 – Upgrade Option 4: ESR-PRE2 Upgrade with RPR Switchover
- Page 9 – Rollback Procedure for Option 4; Obtaining Documentation
- Page 10 – Product Documentation DVD; Documentation Feedback
- Page 11 – Cisco Product Security Overview; Reporting Security Problems in Cisco Products
- Page 12 – Obtaining Technical Assistance; Cisco Technical Support & Documentation Website; Submitting a Service Request
- Page 13 – Definitions of Service Request Severity; Obtaining Additional Publications and Information
Corporate Headquarters:
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Upgrading to Cisco IOS Release 12.2(28)SB on a
Cisco 10000 Series Router
This document describes how to upgrade a Cisco 10000 series router to Cisco IOS Release 12.2(28)SB
on an ESR-PRE2 processor. Four different procedures are available; the choice of which to use depends
on the specific system configuration you start from.
Upgrading a system that currently uses an ESR-PRE1 requires a hardware upgrade to an ESR-PRE2. For
hardware installation instructions, see the
Cisco 10000 Router Performance Routing Engine Installation
at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/3971pr.htm
Technical Support
The Cisco Technical Support Website provides online documents and tools for troubleshooting and
resolving technical issues with Cisco products and technologies. Support is available 24 hours a day,
365 days a year, at this URL:
http://www.cisco.com/techsupport
This web page has a link for email or phone technical support.
Note
All the procedures in this document are service-affecting. These procedures can require a hardware
replacement, forced switchover of the active PRE, or software reload. At some point during each
process, the router will not be available for user traffic.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Upgrading to Cisco IOS Release 12.2(28)SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Paths and Compatibility Upgrade Paths and Compatibility Table 1 shows the upgrade procedure options matched to the starting ESR-PRE version and Cisco IOS release. Use the information in Table 1 to determine...
3 Upgrading to Cisco IOS Release 12.2(28)SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 1: ESR-PRE1 Upgrade with Cold Start To perform the upgrade, follow these steps: Step 1 On the active ESR-PRE1, issue the write memory command to make sure the startup configuration is up to date. Ste...
4 Upgrading to Cisco IOS Release 12.2(28)SB on a Cisco 10000 Series Router OL-8833-01 Upgrade Option 2: ESR-PRE2 Upgrade with Cold Start Upgrade Option 2: ESR-PRE2 Upgrade with Cold Start This procedure assumes the following configuration: • Cisco 10000 series chassis with two installed ESR-PRE2 pro...
