Chief XSM Series - Manual - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

XSM/XTM Series Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all deta...

Page 3 - DIMENSIONS; XSM

Installation Instructions XSM/XTM Series 3 DIMENSIONS 24 .80 63 0 0 45 1.77 90 3.54 105 4.13 150 5.91 165 6.50 210 8.27 225 8.86 270 10.63 285 11.22 330 12.99 345 13.58 405 15.94 465 18.31 525 20.67 585 23.03 25.98 660 27.00 685.8 12.9 .51 .40 10.2 WITH REVERSING THE UPRIGHTS MAX MOUNTING PATTERN IS...

Page 4 - LEGEND

XSM/XTM Series Installation Instructions 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allenta...

Page 5 - TOOLS REQUIRED FOR INSTALLATION; Custom

Installation Instructions XSM/XTM Series 5 TOOLS REQUIRED FOR INSTALLATION PARTS 7/32" (5.5mm) Wood Stud #2 5/16" (7.9mm) Concrete Custom XSM2XXX/ XTM2XXX Hardware [Included with XSM2XXX/XTM2XXX Models Only] J11 (6) M5 A (1) B (1) C (1) E (1) F (1) G (1) H (4) J (1) [Used on XSMU/XTMU Models...

Page 6 - INSTALLATION; Locate Mounting Site; Installing to a Wood Stud Wall

XSM/XTM Series Installation Instructions 6 INSTALLATION The XTM and XSM have been designed to be mounted directlyonto either a wood stud or concrete wall. The XTM has bracketswhich allow the display to be tilted. The XSM has static bracketswhich keep the display in an upright position. Locate Mounti...

Page 7 - Figure 2

Installation Instructions XSM/XTM Series 7 Figure 2 8. Mark the attachment points for the lower mounting slots,making sure the attachment points are located on the studs.(See Figure 2) 9. Drill 7/32" pilot holes at markings for lower mounting holes.(See Figure 2) 10. Use two 5/16 x 2-1/2" la...

Page 8 - Figure 4

XSM/XTM Series Installation Instructions 8 Figure 4 WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONALINJURY OR DAMAGE TO EQUIPMENT! Using screws ofimproper size may damage your display. Properly sizedscrews will easily and completely thread into displaymounting hole...

Page 9 - Figure 6; XSM Model

Installation Instructions XSM/XTM Series 9 Figure 6 Attaching Screen to Wall Mount 1. Attach wall bracket caps (H) to top and bottom of both wallbrackets. (See Figure 7) Figure 7 2. Adjust Velcro® pull strap (if necessary) so it does notextend beyond bottom of screen. (See Figure 8) NOTE: NEVER plac...

Page 10 - Adjusting Roll/Height of Wall Brackets; Figure 9

XSM/XTM Series Installation Instructions 10 7. Proceed to Adjusting Roll/Height of Wall Brackets section. Figure 9 XSM Model 8. Push interface bracket tab all the way down so that thelower mounting slot is blocked. (See Figure 10) Figure 10 9. Hang the top hook of interface brackets onto the top bar...

Page 11 - Add padlock

Installation Instructions XSM/XTM Series 11 Locking XSM Mount (Optional) Add padlock (not included) to interface bracket tab to lock theXSM mount. (See Figure 13) Figure 13 Add padlock

Page 12 - Europe; Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands; Asia Pacific; 008 Milestone AV Technologies,

XSM/XTM Series Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 24F, Block D, Lil...

Chief XSM Series - Manual

Table of Contents:

Summary

Other Chief Models