Chief VESA 75mm - Manual
Chief VESA 75mm – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS AND PRECAUTIONS!; CAUTION; TOOLS REQUIRED FOR INSTALLATION
- Page 3 – DRAWINGS
- Page 4 – INSPECT THE UNIT BEFORE INSTALLING; WARNING: Watch for pinch points. Do not put your fingers; Read all instructions before starting installation.; FHP INSTALLATION; WARNING: It is the responsibility of the installer to verify that; Install the FHP as follows:; WARNING: Improper installation can result in serious per-; Secure the ceiling plate at the desired location.
- Page 5 – DISPLAY INSTALLATION; Install the display as follows:; VESA Compliant Flush Mounting; If monitor uses a screw size other than M4, DO NOT; VESA Compliant Recessed Mounting; Non-VESA Compliant Mounts; Contact Chief Manufacturing for custom interface brackets.
- Page 6 – CABLE MANAGEMENT; WARNING: Make sure your cables do not run through a pinch; Install bottom cable cover over remaining exposed cables.; ADJUSTMENTS; CAUTION: Overtightening adjustment will cause excessive; Rotational Tilt, Pitch, and Roll Adjustment; Check for desired tension.
Small Flat Panel Ceiling Mount
with Adjustable Column (FHP-110)
The FHP is a sleek, Centris™ mounting system designed for all
VESA® 75mm/100mm compliant displays. The mount includes
an adjustable column, cable management, and a variety of
screen positioning options. The all-metal mount is available in
either silver, black or white.
The slender column on the mount is finely finished with easy
adjustment between 23 inches and 42 inches in 1 inch incre-
ments. The snap on cable management cover, fitting snugly
against the column, conceals unsightly cabling.
The mount rotates 360 degrees, allowing portrait or landscape
mounting of your display. The friction-adjustable pivot points
include 15 degrees of up and down tilt for customized move-
ment.
BEFORE YOU BEGIN
•
Caution: To prevent damage to the FHP, which could affect or void the Factory warranty, and to the equip-
ment that will be attached to it, thoroughly study all instructions and illustrations before you begin the
installation. Pay particular attention to the “Important Warnings and Precautions” on Page 1.
•
The maximum weight to be installed on the FHP ceiling mount is 40 pounds (18.1 Kg)
•
The FHP ceiling mount is designed to be installed using supporting framework. The structure to which the FHP
ceiling mount is anchored must be capable of supporting
five times
the total weight of the mount and all attached
equipment.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE.700
SAVAGE, MINNESOTA 55378 USA
PART NO. 8804-000153
2006 Chief Manufacturing
www.chiefmfg.com
Printed in USA 12-06
I N S T A L L A T I O N I N S T R U C T I O N S
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation Instructions FHP IMPORTANT WARNINGS AND PRECAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre...
Installation Instructions FHP 3 DRAWINGS Ceiling Plate Set Screw Outer Column Cable Management Cover Socket Head Cap Screw Nylon Washer Lock Nut Inner Column (optional) M4 X .7 X 20mm or M4 X .7 X 30mm Phillips pan head screws M4 X .7 X 12mm Phillips pan head screws Spacers Phillips Pan Head Screw(A...
4 Installation Instructions FHP INSPECT THE UNIT BEFORE INSTALLING WARNING: Watch for pinch points. Do not put your fingers between movable parts. 1. Carefully inspect the FHP for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation unt...
