Chief PST 2000 Series - Manual
Chief PST 2000 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS and CAUTIONS!; DIMENSIONAL DRAWING
- Page 3 – CONTENTS; REF DESCRIPTION
- Page 4 – PST INSTALLATION; Select Mounting Location
- Page 5 – Mount the PST; Holding the PST against the wall, select the pair of; right of; OR; left; OR; Figure 5. Mounting Holes – 16” Apart on Center
- Page 6 – ATTACH PSB TO THE DISPLAY; Figure 8. Mount Plasma Static Bracket to Wall
Chief Manufacturing, a division of Milestone AV Technologies 8804-000255 Rev F
8401 Eagle Creek Parkway, Sav age, MN 55378 ©2008 Milestone AV Technologies
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918 10/08
I N S T A L L A T I O N I N S T R U C T I O N S
LARGE FLAT PANEL DISPLAY STATIC MOUNT
PST 2000 Series
The PST static wall mount accommodates large flat
screens weighing up to 200 lbs (90.72kg). The teardrop
holes in the mount allow for quick connect/disconnect of
the screen, thus simplifying installation and maintena nce
processes.
The top and bottom mounting brackets are adaptable to
supporting framework with wood studs that are 16” on
center or 24”on center.
The mount has integrated lateral shift, allowing for four
different mounting options. For dual wood studs 16” on
center, the lateral shift is
+
4.5 inches. For dual wood
studs 24” on center, the lateral shift is
+
0.5 inches.
After installing the flat screen on the mount, the screen
can be locked in place using the convenient locking flag.
A padlock can be used on the latching flag for added
security.
The mount is concealed behind the display, making it a
low profile wall mount.
! IMPORTANT:
If the installation of this product
requires OSHPD seismic approval, refer to OSHPD
pre-approval documents and drawings before beginning
installation. OSHPD documents and drawings are
available at
, and located on the
product information page for the mount.
PST 2000 Series
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Warnings and Cautions” on Page 2.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the
mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the PST mount is 200 lbs (90.72kg).
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions PST 2000 Series 2 IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow theinstructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the...
Installation Instructions PST 2000 Series 3 CONTENTS DIMENSIONAL DRAWING ..................................... 2TOOLS REQUIRED FOR INSTALLATION.............. 3PARTS LIST .............................................................. 3PST INSTALLATION ................................................ ...
Installation Instructions PST 2000 Series 4 PST INSTALLATION Perform the following procedures to mount the PST. Select Mounting Location To select the mounting location, do the following: WARNING: It is the responsibility of the installer to verify that the wall to which the mount isanchored will sa...
