Chief PL-1 - Manual
Chief PL-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS and CAUTIONS!; DIMENSIONAL DRAWING
- Page 3 – CONTENTS; PARTS LIST; REF DESCRIPTION QTY
- Page 4 – INSTALLATION
- Page 6 – Figure 4. Install Projector
Chief Manufacturing, a division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
8803-000065 Rev C
©2008 Milestone AV Technologies
05/08
I N S T A L L A T I O N I N S T R U C T I O N S
Projector
Lock
(PL-1)
The PL-1 projector lock, constructed with heavy gauge
steel, is designed to prevent access to projector mounts.
The projector lock protects against disconnecting
projectors from their mounts in most high-risk
environments, minimizing the probabilities theft.
The design of the PL-1 ensures proper ventilation for
your projector while providing excellent security and
protection.
PL-1
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to your display, which could affect or void the Factory warranty,
thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay
particular attention to the “Important Warnings and Cautions” on Page 2.
•
If you have any questions about this installation, contact Chief Manufacturing.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions PL-1 2 IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the correspon...
Installation Instructions PL-1 3 CONTENTS DIMENSIONAL DRAWING ............................................... 2 TOOLS REQUIRED FOR INSTALLATION ....................... 3 PARTS LIST ...................................................................... 3 INSPECT INSTALLATION LOCATION ...................
Installation Instructions PL-1 4 INSTALLATION This manual contains installation procedures that cover pole-mounted applications: NOTE: Omit Step1 thru 3 and proceed to Step 4 if the projector is already installed on the 1-1/2” NPT pipe. 1. If projector is mounted, remove projector and SLB. 2. Loosen...
