Chief MWC Series - Manual
Chief MWC Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; IMPORTANT WARNINGS AND CAUTIONS!; corresponding instructions.; DIMENSIONS
- Page 3 – TOOLS REQUIRED FOR INSTALLATION; Stud Sensor; PARTS
- Page 4 – INSTALLATION; MOUNT INSTALLATION; Figure 2: Mount Installation; CPU INSTALLATION; upper; Figure 3: Upper Front Plate Attach Screws
- Page 5 – Figure 5: Install Strap; Both; Figure 6: Insert CPU; Tilt the top of the front plate towards you.; DISPLAY INSTALLATION; Exceeding the weight capacity can result; Figure 8: Align and Lower Display; Side Plates; OPEN; Front Plate
- Page 6 – TILT ADJUSTMENT; Figure 10: Tilt Adjustment; TILT LOCK; Figure 11: Tilt Lock Holes
I N S T A L L A T I O N I N S T R U C T I O N S
MEDIUM FLAT PANEL TILT WALL MOUNT WITH
INTEGRATED CPU
Model: MWC Series
Specifications:
•
Accommodates three installation options:
- Dual Wood Stud (16" on-center; requires
5/16" x 2-1/2" long hex head lag screws -
included)
- Dual Steel Stud (requires Chief PAC-115
Steel Stud / Drywall Anchor Kit - not included)
- Drywall (1/2" minimum; requires Chief PAC-
115 Steel Stud / Drywall Anchor Kit - not
included)
•
Accommodates CPU up to approximately 18-3/4"
x 3-3/4"; see "DIMENSIONS" for specific details.
•
Infinite display tilt adjustment between 0-15° with
positive stops at 0°, 5°, 10°, and 15°.
•
Weight capacity of 100 lbs (45 kg).
NOTE:
Requires display interface providing 200x200mm
mounting button pattern; not included.
WARNING:
It is the installer’s responsibility to make sure all components are properly assembled and installed
using the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in
serious personal injury, damage to equipment, or voiding of factory warranty.
•
If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
BEFORE YOU BEGIN
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8804-000296 RevB
2007 Chief Manufacturing
10/07
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model: MWC Series Installation Instructions 2 IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follo...
Installation Instructions Model: MWC Series 3 TOOLS REQUIRED FOR INSTALLATION • Stud Sensor • Drill • 5/32" Drill Bit • 1/2" Wrench • 5/32" Security Hex Key (included) NOTE: Other tools may be required depending on your method of installation. PARTS After unpacking carton, inspect and ve...
Model: MWC Series Installation Instructions 4 INSTALLATION MOUNT INSTALLATION Three installation options exist: • Dual Wood Stud (16" on-center; requires 5/16" x2-1/2" long hex head lag screws) • Dual Steel Stud (requires Chief PAC-115 SteelStud / Drywall Anchor Kit; not included) • Dryw...
