Chief MSR Series - Manual
Chief MSR Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS and CAUTIONS!; not follow the corresponding instructions.; DIMENSIONAL DRAWING
- Page 3 – CONTENTS; Drill and drill bit set; PARTS LIST
- Page 4 – MSR INSTALLATION; five times
- Page 5 – Mount the MSR; Place MSR against wall and align MSR upper; Figure 5. MSR Positioning Adjustments
- Page 6 – ATTACH MSB TO THE DISPLAY; OR; INSTALL THE DISPLAY; Figure 6. Install the Display
- Page 7 – Insert extender slot into top of latching flag.; Figure 8. Raise Latching Flag to Lock; Locknut
CHIEF MANUFACTURING INC.
8840-000079 RevF
1-800-582-6480
952-894-6280 FAX 952-894-6918
©2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
10/07
I N S T A L L A T I O N I N S T R U C T I O N S
MEDIUM FLAT PANEL DISPLAY STATIC MOUNT
MSR Series
The MSR Series static mount accommodates medium
flat panel displays weighing up to 125 lbs (57 kgs).
The teardrop holes in the mount allow for quick
connect/disconnect of the display, thus simplifying
installation and maintena nce processes.
The top and bottom mounting brackets are adaptable to
single wood stud mounting or dual wood studs that are
16” on center.
After installing the display on the mount, the screen can
be locked in place using the convenient locking flag.
A padlock can be used on the latching flag for added
security.
The mount is concealed behind the display, making it a
low profile wall mount.
MSR Series
! IMPORTANT:
If the installation of this product requires OSHPD seismic approval, refer to OSHPD pre-approval
documents and drawings before beginning installation. OSHPD documents and drawings are available at
, and located on the product information page for the mount.
BEFORE YOU BEGIN
CAUTION: To prevent damage to your monitor and MSR, which could affect or void the Factory
warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay
particular attention to the Warnings and Cautions in this document.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the
mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the MSR Series static wall mount is 125 lbs (57 kg).
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions MSR Series 2 IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do notfollow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corr...
Installation Instructions MSR Series 3 CONTENTS DIMENSIONAL DRAWING ..................................... 2TOOLS REQUIRED FOR INSTALLATION.............. 3PARTS LIST .............................................................. 3MSR INSTALLATION .............................................. 4 Selec...
Installation Instructions MSR Series 4 MSR INSTALLATION Select And Prepare Mounting Location WARNING: Improper installation can result in serious personal injury or damage to equipment!Make sure that the structural members can support aredundant weight factor five times the total weight of the equip...
